John Deere 8260R Engine Specifications
Engine Make – John Deere
Engine Model – PSX 9.0L
Number of Cylinders – 6
Displacement, cu in (L) – 548 (9.0)
Engine Bore, in (mm) – 4.66 (118.4)
Engine Stroke, in (mm) – 5.35 (136)
Advertised Engine Power, Rated, hp (kW) – 260 (191)
Maximum Engine Power, hp (kW) – 286 (210)
Rated Engine Speed, rpm – 2100
Power Boost, hp (kW) – 35 (26)
Fuel Tank capacity, gal (L) – 184 (695)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Block Design, Replaceable Liners – Wet liners, replaceable
Aspiration, Turbocharged or Naturally Aspirated – Two-stage
turbocharged, aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4 Interim
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – Cooled EGR
Diesel Oxidation Catalyst (DOC) – Standard
Diesel Particulate Filter (DPF) – Standard
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Variable belt sheaves
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 200
JD 8260R Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 216 (161)
PTO Speeds, rpm – 1000 std; 540/1000 opt
PTO operational Type (Independent; Live; Continuous) – Independent
Basic Transmission
Manufacturer’s Description – Automatic PowerShift
Transmission Type – Automatic power shift
Number of Forward / Reverse Speeds – 16F/4R
Maximum Speed Forward, mph (kph) – 26 (42)
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – Standard
Optional Transmission
Manufacturer’s Description – AutoPowr/IVT
Transmission Type – Hydro-mechanical
Number of Forward / Reverse Speeds – Infinite
Manufacturer’s Description – AutoPowr/IVT 50 km/h (31 mph)
Transmission Type – Hydro-mechanical
Number of Forward / Reverse Speeds – Infinite
John Deere 8260R Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – MFWD 120.1 (3050); ILS
118.9 (3020)
Front Tire Size orTrack Width, MFD/4WD or Track – 420/90R30
Rear Tire Size or Track Width – 480/80R46 Duals
Axles and Brakes
Final Drive Location and Description – Inboard planetary
Axle Output End, Flange or Bar – Bar
Axle Bar Diameter, in (mm) – 4.33 (110) std; 4.72 (120) opt
Suspended Front Axle Available – Independent Link Suspension optional
Service Brake Type – Inboard wet disc
JD 8260R Hydraulics and Hitch
Hydraulic System Type – Closed Center, pressure and flow compensated
Main Hydraulic Pump Type – Axial piston
Implement Pump Flow, gpm (Lpm) – 44 (166.6)
Optional Pump Flow, gpm (Lpm) – 60 (227.1)
Number of Standard Remote Valves – 4
3-Point Hitch Category – 3/3N w/QuikCoupler
Optional Hitch Category – 4N/3 w/Quik-Coupler
Draft Sensing or Lift Control – Electrohydraulic
Draft Link Ends Telescopic – No; Quik-Coupler std
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 13,600 (6169)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 18,700 (8482)
Drawbar Description – Category 3, Swinging, adjustable
John Deere 8260R Dimensions and Weights
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 244 (6197)
Height to Top of Cab, in (mm) – 129.3 (3285)
Overall Width, with standard wheels or tracks, in (mm) – 137.3 (3488)
Weight, MFD/4WD w/ROPS, lb (kg) – No open ROPS
Weight, 2WD w/Cab, lb (kg) – No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – MFWD/PST
27,218 (12346); ILS/IVT 30,252 (13722)
Weight, Total allowable, w/maximum ballast, lb (kg) – 39,683 (18000)