JD 7200R Engine Specifications
Engine Power, Rated, hp (kW) – 200 (147)
Maximum Engine Power, hp (kW) – 220 (162)
Engine Speed, rpm – 2100
Power Boost, hp (kW) – 20 (14.9)
Fuel Tank, gal (L) – 133 (504)
Engine Make – John Deere
Engine Model – Power Tech PSX 6.8L
Cylinders – 6
Displacement, cu in (L) – 414 (6.8)
Engine Bore, in (mm) – 4.193 (106.5)
Engine Stroke, in (mm) – 5.0 (127)
Block Design, Replaceable Liners – Wet replaceable liners
Aspiration, Turbocharged or Naturally Aspirated – Turbo, air-to-air
aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control – Electronic
Fuel Injection to combustion chamber – Direct
Emission Level – Tier 4 Interim
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – Cooled EGR
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – DPF standard
Exhaust Pipe – Vertical
Tractor Cooling System Fan Drive Type – Belt driven pusher fan
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 200
John Deere 7200R Power Take Off
PTO Horsepower, hp (kW) – 164 (123)
PTO Speeds, rpm – 540 / 540E / 1000 / 1000E
PTO operational Type – Independent
Transmission
Description – AutoQuad PLUS Eco
Transmission Type – Powershift within ranges
Forward / Reverse Speeds – 20F / 20R
Maximum Speed Forward, mph (kph) – 26.1 (42)
Creeper Range – No
Shuttle (Forward-Reverse) – Yes
Description – PowrQuad PLUS
Transmission Type – Powershift within ranges
Forward / Reverse Speeds – 16F / 16R
Description – AutoPowr IVT
Transmission Type – Hydrostatic
Forward / Reverse Speeds – Infinite
JD 7200R Wheels and Tires
Drive Wheels – 2WD / 4WD
Tractor Steering Configuration – Front Steer
Wheelbase, 2WD, in (mm) – 119.4 (3032)
Wheelbase, 4WD, in (mm) – 115.2 (2925)
Front Tire Size, 2WD – 11.00-16, 12PR, F2
Front Tire Size, 4WD – 420/90R30 R1
Rear Tire Size – 480/80R46 R1 Duals
Axles and Brakes
Final Drive – Inboard planetary
Rear Axle Output End – Bar
Rear Axle Bar Diameter, in (mm) – 3.937 (100)
Suspended Front Axle – Triple Link Suspension optional
Brake Type – Oil disc
John Deere 7200R Hydraulic System
Hydraulic System Type – Closed center, pressure-flow compensated
Main Hydraulic Pump Type – Integrated axial piston
Standard Pump Flow, gpm (Lpm) – 32 (121)
Optional Pump Flow, gpm (Lpm) – 59 (223)
Standard Remote Valves – 3
3-Point Hitch
3-Point Hitch Category – Category 3/3N w/Quik-Coupler
Optional Hitch Category – No option
Draft Sensing or Lift Control – Draft control and/or hitch slip
Draft Link Ends Adjustable – No; Quik-Coupler std
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 12,000 (5443)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 15,200 (6895)
Drawbar Description – Category 3, Adjustable Swinging
JD 7200R Dimensions and Weights
Length, 2WD, incl. Hitch/Drawbar, in (mm) – 217 (5520)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 217 (5520)
Height to Top of Cab, in (mm) – 128 (3245)
Height to Top of ROPS raised, in (mm) – No open ROPS
Overall Width, with standard wheels or tracks, in(Mm) – 137.4 (3490)
Weight, 2WD w/ROPS, lb (kg) – No open ROPS
Weight, MFD/4WD w/ROPS, lb (kg) – No open ROPS
Weight, 2WD w/Cab, lb (kg) – 18,104 (8212)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 23,080
(10469)
Weight, Total allowable, w/maximum ballast, lb (kg) – 31,967 (14500)
Attachments
John Deere H480 Loader
Maximum lift height – 4650 mm (183.1 in.)
Lift capacity at full height – 2065 kg (4553 lb)
Boom breakout force – 4793 kgf (10567 lbf)
Bucket rollback force capacity at ground-level line – 4640 kgf (10229
lbf)
Clearance at full height bucket dumped – 3820 mm (150.4 in.)
Dump angle, degrees – 58.9 degree (angle)
Rollback angle, degrees – 42 degree (angle)