JD 6230 Engine Specifications
Engine Model – 4.5L PowerTech E
Cylinders – 4
Displacement, cu in (L) – 276 (4.5)
Engine Bore, in (mm) – 4.193 (106.5)
Engine Stroke, in (mm) – 5.0 (127)
Block Design, Replaceable Liners – Wet sleeve
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged, air to
water aftercooling
Engine Power, Rated, hp (kW) – 95 (71)
Maximum Engine Power, hp (kW) – Same as Advertised
Engine Speed, rpm – 2300
Power Boost, hp (kW) – No boost
Fuel Tank, gal (L) – 43.6 (165)
Fuel System Description – High Pressure Common Rail
Fuel System Control – Electronic
Fuel Injection to combustion chamber – Direct
Emission Level – Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – No
Diesel Oxidation Catalyst (DOC) – No
Diesel Particulate Filter (DPF) – No
Exhaust Pipe – Vertical
Cooling System Fan Drive Type – Viscous
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 115
John Deere 6230 Transmission
Description – SyncroPlus 12F/4R
Transmission Type – Gear
Forward / Reverse Speeds – 12F / 4R
Maximum Speed Forward, mph (kph) – 19 (30.6)
Creeper Range – Yes
Shuttle (Forward-Reverse) – No
Optional Transmissions
Description – SyncroPlus 16F/16R
Transmission Type – Gear
Forward / Reverse Speeds – 16F / 16R
Description – PowerQuad PLUS
Transmission Type – Gear
Forward / Reverse Speeds – 16F / 16R
JD 6230 PTO (Power take off)
PTO Horsepower, hp (kW) – 76 (57)
PTO Speeds, rpm – 540 / 1000
PTO operational Type – Independent
Wheels
Drive Wheels – 2WD / 4WD
Tractor Steering Configuration – Front Steer
Wheelbase, 2WD, in (mm) – 94.5 (2400)
Wheelbase, 4WD, in (mm) – 94.5 (2400)
Rear and Front Axles
Final Drive – Planetary / Inboard
Axle Output End – Flanged standard / Bar optional
Axle Bar Diameter, in (mm) – 3.1 (78.7)
Suspended Front Axle – Triple-Link Suspension optional
Brake Type – Wet disk
John Deere 6230 Hydraulic System
Hydraulic System Type – Open center, load sensing, constant flow
Main Hydraulic Pump Type – Gear
Standard Pump Flow, gpm (Lpm) – 21.1 (80)
Optional Pump Flow, gpm (Lpm) – 29 (110)
Standard Remote Valves – 1
Hitch and Drawbar
3-Point Hitch Category – Category 2
Optional Hitch Category – Category 3N / 2
Draft Sensing or Lift Control – Optional, pins in lower link
Draft Link Ends Adjustable – Optional
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 5,028 (2280)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No Option
Tire Size
Front Tire Size, 2WD – 10.0 – 16
Front Tire Size, 4WD – 12.4R24 R1W
Rear Tire Size – 18.4R30 R1W