JD 6150J Engine Specifications
Engine – John Deere PowerTech
Type – Inline Diesel Engine, 2 valves
Aspiration – Turbocharged with Charge Air Cooler
Number of cylinders – 6
Displacement – 6.8 L
Compression ratio – 17:1
Power at rated speed – 110 kW (150 hp)
Engine rated speed – 2100 rpm
Engine maximum speed – 2200 rpm
Torque bulge – 26 %
Maximum torque – 634 Nm (467 lb-ft)
Speed at maximum torque – 1500 rpm
Fuel Pump – Rotary pump
Fuel Transfer Pump – Mechanical fuel transfer pump
Filtering System – Two-stage with water separator
Electrical System – 12V
Alternator Capacity (with standard lights) – 90A
Alternator Capacity (with premium lights) – 120A
Battery Type – Sealed (unserviceable)
Battery Capacity – 12V-150Ah
Starter Motor – 4kW
Lights – Economic-Halogen
John Deere 6150J Power Take-Off
PTO Type – Independent
Actuation – Electro-Hydraulic
PTO Power at Engine Rated Speed – 94 kW (126 hp)
PTO Rated Speed – 540/1000 rpm
Engine Speed at PTO Rated Speed – 1995 rpm
JD 6150J Transmission
Model – PowrQuad
Transmission Type – Planetary gears, hydraulic shift
Number of gears – 16 forward and 16 reverse gears
Ground Speed/Reverse – 2.7-32.7/3.1-38.4 km/h
Clutch – Mechanical/hydraulic
Clutch Type – Multidisc oil cooled
Actuation – Auto-adjustable hydraulic
No. of disks – 5
Diameter of disks – 225 mm (8.85 in.)
Axles and Brakes
Front Axle – 4×4 Standard
Front Axle Differential Lock – Automatic
Limited Slip – Yes
Supension – No
Maximum Speed – 30 km/h (18.6 mph)
Rear Axle – Rack and Pinion
Rear Axle Differential Lock – Hydraulic
Service Brake Type – Disk in oil bath
Actuation – Auto-adjustable, hydraulically actuated
Park Brake Type – Transmission lock
Actuation – Controlled by reverse drive lever
John Deere 6150J Hydraulics and Hitch
Type – Closed center, pressure-and-flow compensated (PFC)
Hydraulic Pump – Piston Pump
Pump flow rate – 100 L/min (26.4 gpm)
Maximum pressure – 200 bar (2900 psi)
Standard Hitch – Category 3, ball joint type
Optional Hitch – Category 3, hook type
Lifting capacity at 610 mm (2 ft) of hitch – 3580 kgf (7892 lbf) / 5280
kgf (11640 lbf)
Control type – Electronic, with sensors in lower hitch arms
Standard selective control valves – Two basic SCV
Optional selective control valves – Two deluxe SCV and one basic SCV
Optional selective control valve flow rate – 96 L/min (25.4 gpm)
JD 6150J Capacities
Fuel Tank – 300 L (79.26 gal)
Cooling System Non-Emissions Certified Engine – 23 L (6 gal)
Cooling System Tier 3-Stage IIIA Engine – 26.5 L (7 gal)
Engine Oil (with filter) – 20 L (5.28 gal)
Transmission/hydraulic System – 75.45 L (19.93 gal)
Front Axle Differential Housing – 7.6 L (2 gal)
Front Axle Final Drive Housing (each) – 1.7 L (0.45 gal)
John Deere 6150J Dimensions and Weights
Front Tires – 16.9-26 R1 8L / 16.9-28 R1 10L
Rear Tires – 18.4-38 R1 10L / 24.5-32 R1 10L
Wheel Base – 2650 mm (104.3 in)
Total Length with Front Weights – 4665 mm (183.6 in)
Maximum Height – 2863 mm (112.7 in)
Width of the Front Axle (flange to flange) – 1780 mm (70 in)
Width of the Rack and Pinion Rear Axle – 2807 mm (110.5 in)
Maximum Permissible Front Axle Load – 5000 kg (9920 lb)
Maximum Permissible Rear Axle Load – 7500 kg (16534 lb)
Front Axle Weight (without ballast) – 2334 kg (5145 lb)
Rear Axle Weight (without ballast) – 3502 kg (7720 lb)
Maximum Ballasted Weight – 8500 kg (18739 lb)
Maximum Permissible Weight – 10500 kg (23148 lb)