JD 6110RC Engine Specifications
Engine Model – 4045HL490
Type – Turbocharged diesel engine with charge air cooler and exhaust gas
recirculation
Engine power according to 97/68/EC at rated speed – 81 kW (110 HP)
Maximum torque at 1500 rpm – 480 Nm (354 lb-ft)
Number of cylinders – 4
Bore – 106,5 mm (4,19 in)
Stroke – 127,0 mm (5,0 in)
Displacement – 4,5 L (276 in3)
Compression ratio – 19:1
Firing order – 1-3-4-2
Intake valve clearance – 0,46 mm (0,018 in)
Exhaust valve clearance – 0,53 mm (0,021 in)
Slow Idle – 850 rpm
Fast idle – 2250 rpm
Rated engine speed – 2100 rpm
Operating speed range (rpm) – 1300-2100
Electrical System Rating – 12V
Battery – 12V, 110Ah or 12V, 15 Ah
Alternator with overvoltage protection – 14V, 90A or 14V, 120A or 14V,
150A
Starting motor – 12V, 3,0 kW (4,0 hp)
Ground connection – negative
John Deere 6110RC Power Take-off
Rear PTO Type – Electro-hydraulically engaged, oil cooled, multi-disc
design
Engine speed rear PTO 540 rpm – 1938 rpm
Engine speed rear PTO 1000/540 rpm – 1962 rpm / 1967 rpm
Engine speed rear PTO 1000/540/540E rpm rear PTO – 1962 rpm / 1967 rpm /
1496 rpm
Max. rear PTO power at rated PTO speed – 69 kW (93 HP)
Intelligent Power Management (power boost) – 75 kW (101 HP)
Front PTO Type – Electro-hydraulically engaged, oil cooled
Engine speed front PTO 1000 rpm – 1969 rpm
JD 6110RC Transmission
Type – AutoQuad Plus EcoShift transmission
Gears – Planetary gears, hydraulically actuated
Clutch – hydraulically
24 forward gears, 24 reverse gears – 0.18-40 km/h (0.11-25 mph)
Hydraulic System
Type – PFC system (Pressure-and-flow compensated hydraulic system with
variable flow rate)
Axial piston pump – 35 cm3 (2,13 in3) / optional 45 cm3 (2,75 in3)
Delivery rate per minute at rated speed (35 cm3 pump) – 80 liters (21,1
U.S.gal.)
Delivery rate per minute at rated speed (45 cm3 pump) – 114 liters (30,1
U.S.gal.)
System pressure (min.) – 3000 kPa (30 bar; 435 psi)
System pressure (max.) – 20000 kPa (200 bar; 2900 psi)
Steering – hydrostatic
John Deere 6110RC Hitch
Rear hitch Category – CAT 2 and 3N
Lift cylinder, diameter – 80 mm
Maximum lift capacity directly at coupling points – 5600 kg (12345 lb)
Sustained lift capacity, 610 mm behind the coupling points – 2700 kg
(5950 lb)
Sustained lift capacity, 1800 mm behind the coupling points – 2100 kg
(4630 lb)
Front hitch Category – CAT 2
Maximum lift capacity at coupling points – 3000 kg (6610 lb)
Sustained lift capacity at coupling points – 2570 kg (5665 lb)
JD 6110RC Capacities
Fuel tank (Low profile cab) – 195 L (51,5 US gal.)
Fuel tank (Cab without low profile) – 205 L (54,2 US gal.)
Cooling system (engine cooling and cab heating) – 28,2 L (6,2 US gal.)
Engine crankcase – 17,1 L (4,5 US gal.)
Transmission/hydraulic system, oil change (PowrQuad transmission) – 52 L
(13,7 US gal.)
Transmission/hydraulic system, oil change (PowrQuad Plus transmission) –
52 L (13,7 US gal.)
Transmission/hydraulic system, oil change (extra with creeper
transmission) – 1 L (0,3 US gal.)
Transmission/hydraulic system, oil change (extra with front-wheel drive
axle with or without TLS) – 3 L (0,8 US gal.)
Front PTO – 2,6 L (0,69 US gal.)
Front-wheel drive axle housing – 8,2 L (2,2 US gal.)
Front-wheel drive final drives (without brake) – 1,7 L (0,4 US gal.)
John Deere 6110RC Tires
Front Tires – 340/85R24 (360/70R24)
Front Tires – 380/85R24 (380/85R28)
Rear Tires – 420/85R38 (460/85R38)
Rear Tires – 460/85R30 (460/85R34)
Rear Tires – 480/70R30 (480/70R34)
Dimensions
Wheel base – 2400 mm (94,5 in)
Length (Basic weight to draft link in horizontal position) – 4305 mm
(169,5 in)
Length (Front weight to draft link in horizontal position) – 4727 mm
(186,1 in)
Maximum total height from ground to cab roof (without beacon light) –
2777 mm (109,3 in)
Width (front axle – flange to flange) – 1680 mm (66,1 in)
Width (front axle – maximum tread width without extension) – 2015 mm
(79,3 in)
Width (rear axle – flange to flange) – 1552 mm (61,1 in)
Maximum width for road travel – 2550 mm (100,4 in)
Maximum ground clearance at differential housing (with drawbar) – 525 mm
(20,7 in)
Maximum ground clearance at differential housing (with drawbar) – 510 mm
(20,1 in)