John Deere 6100MC Engine Specifications
Engine type – 4045HL490
Type – Turbocharged diesel engine with charge air cooler and exhaust gas
recirculation
Engine power according to 97/68/EC at rated speed – 74 kW (100 hp)
Maximum torque at 1500 rpm – 452 Nm (333 lb.-ft.)
Number of cylinders – 4
Bore – 106.5 mm (4.19 in.)
Stroke – 127.0 mm (5.0 in.)
Displacement – 4.5 L (276 in.3)
Compression ratio – 19:1
Firing order – 1-3-4-2
Intake valve clearance – 0.46 mm (0.018 in.)
Exhaust valve clearance – 0.53 mm (0.021 in.)
Slow Idle – 850 rpm
Fast idle – 2250 rpm
Rated engine speed – 2100 rpm
Operating speed range (rpm) – 1300 – 2100
Electrical System Rating – 12V
Battery – 12 V, 110 Ah or 12 V, 154 Ah
Alternator with overvoltage protection – 14 V, 90 A or 14 V, 120 A or 14
V, 150 A
Starting motor – 12 V, 3.0 kW (4.0 hp)
Ground connection – negative
JD 6100MC Power Take-off
Rear PTO 540 rpm – 1938 rpm
Rear PTO 1000/540 rpm – 1962 rpm / 1967 rpm
Rear PTO 1000/540/540E rpm rear PTO – 1962 rpm / 1967 rpm / 1496 rpm
Front PTO 1000 rpm – 1969 rpm
Max. front PTO power is limited to – 80 kW (107 hp)
Transmission
Transmission – PowrQuad
Type – four-speed power shift
Gears – 16 forward and reverse
Clutch – wet disc
John Deere 6100MC Hydraulic System
Type – PC system (Pressure-compensated hydraulic system with constant
flow rate)
Gear Pump – 28 cm3 (1.71 in.3) / optional 35 cm3 (2.13 in.3)
Delivery rate per minute at rated speed (28 cm3 pump) – 65 liters (17.2
U.S.gal.)
Delivery rate per minute at rated speed (35 cm3 pump) – 80 liters (21.1
U.S.gal.)
System pressure (min.) – 3000 kPa (30 bar; 435 psi)
System pressure (max.) – 20000 kPa (200 bar; 2900 psi)
Steering – hydrostatic
Hitch
Rear hitch Category – CAT 2 and 3N
Lift cylinder, diameter – 70 mm
Maximum lift capacity directly at coupling points – 4300 kg (9480 lb.)
Sustained lift capacity, 610 mm behind the coupling points – 2000 kg
(4410 lb.)
Sustained lift capacity, 1800 mm behind the coupling points – 1600 kg
(3530 lb.)
Front hitch Category – CAT 2
Maximum lift capacity at coupling points – 3000 kg (6610 lb.)
Sustained lift capacity at coupling points – 2570 kg (5665 lb.)
JD 6100MC Tires
Front Tires – 14.9R24 / 14.9R28
Front Tires – 270/80R36 / 270/95R32
Front Tires – 320/85R24 / 320/85R28
Rear Tires – 270/95R48 / 300/95R46
Rear Tires – 340/85R38 / 380/80R36
Rear Tires – 420/85R30 / 420/85R34
Capacities
Fuel tank (Cab without low profile) – 205 L (54.2 US.gal.)
Fuel tank (Cab with low profile) – 195 L (51.5 US. gal.)
Cooling system (engine cooling and cab heating) – 28.2 L (6.2 US.gal.)
Engine crankcase – 17.1 L (4.5 US.gal.)
Transmission/hydraulic system, oil change (PowrQuad transmission) – 52 L
(13.7 US.gal.)
Transmission/hydraulic system, oil change (PowrQuad PLUS transmission) –
52 L (13.7 US.gal.)
Transmission/hydraulic system, oil change (extra with creeper
transmission) – 1 L (0.3 US.gal.)
Transmission/hydraulic system, oil change (extra with front-wheel drive
axle with or without TLS) – 3 L (0.8 US.gal.)
Front PTO – 2.6 L (0.69 US.gal.)
Front-wheel drive axle housing – 8.2 L (2.2 US.gal.)
Front-wheel drive final drives (without brake) – 1.7 L (0.4 US.gal.)
John Deere 6100MC Dimensions
Wheelbase – 2400 mm (94.5 in.)
Length (Basic weight to draft link in horizontal position) – 4305 mm
(169.5 in.)
Length (Front weight to draft link in horizontal position) – 4727 mm
(186.1 in.)
Maximum total height from ground to cab roof (without beacon light) –
2660 mm (104.7 in.)
Width (front axle – flange to flange) – 1680 mm (66.1 in.)
Width (front axle – maximum tread width without extension) – 2015 mm
(79.3 in.)
Width (rear axle – flange to flange) – 1552 mm (61.1 in.)
Maximum width for road travel – 2550 mm (100.4 in.)
Maximum ground clearance at differential housing (with drawbar) – 450 mm
(17.7 in.)
Maximum ground clearance at differential housing (with drawbar) – 410 mm
(16.1 in.)