John Deere 6100D Engine Specifications
Engine Make – John Deere
Engine Model – 4045-H PowerTech E, 2V
Number of Cylinders – 4
Displacement, cu in (L) – 276 (4.5)
Engine Bore, in (mm) – 4.17 (106)
Engine Stroke, in (mm) – 5.0 (127)
Block Design, Replaceable Liners – Wet liners
Aspiration, Turbocharged or Naturally Aspirated – Turbo, air-to-air
Intercooled
Advertised Engine Power, Rated, hp (kW) – 98 (72.7)
Maximum Engine Power, hp (kW) – Same as Advertised
Rated Engine Speed, rpm – 2100
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 41.7 (158)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Fuel System
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission and Exhaust Treatment
Emission Level, US EPA Tier – Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – No
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – No
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling and Electrical System
Fan Drive Type – Belt
System Rating, Volts – 12
Alternator Rating, Amps – 90
JD 6100D Basic Transmission Configuration
Manufacturer’s Description – 9F/9R PowrReverser
Transmission Type Gear
Number of Forward / Reverse Speeds – 9F / 9R
Maximum Speed Forward, mph (kph) – 17.6 (28.3)
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – Yes
Optional Transmission
Manufacturer’s Description – 9F/3R Top Shaft Synchronized
Transmission Type – Gear
Number of Forward / Reverse Speeds – 9F / 3R
John Deere 6100D PTO
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 82 (61.1)
Power Take Off Speeds, rpm – 540 / 1000
PTO operational Type (Independent; Live; Continuous) – Independent
Wheels
Drive Wheels – 2WD / 4WD
Steering Configuration – Front Steer
Wheelbase, 2WD, in (mm) – 92.5 (2350)
Wheelbase, MFD/4WD, in (mm) – 92.5 (2350)
Front Tire Size, 2WD 10.00 -16 6PR F2
Front Tire Size Width, MFD/4WD – 13.6 -24 6PR R1
Rear Tire Size – 18.4 -34 8PR R1
Rear and Front Axles
Final Drive Location and Description – Planetary / Inboard
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet Disk
John Deere 6100D Hydraulic System
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Gear
Implement Pump Flow, gpm (Lpm) – 17.6 (66.6)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 2
Hitch and Drawbar
3-Point Hitch Category – Category 2
Optional Hitch Category – No option
Draft Sensing or Lift Control – Lower link draft sensing
Draft Link Ends Telescopic – Optional
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 6,800 (3084)
Optional Lift Capacity at lift pin, lb (kg) – No option
Drawbar Description – Swinging Vertical Offset Drawbar
JD 6100D Dimensions
Length, 2WD, incl. Hitch/Drawbar, in (mm) – 168.5 (4280)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 166 (4216)
Height to Top of Cab, in (mm) – 107.5 (2731)
Height to Top of ROPS raised, in (mm) – 110.0 (2794) 4WD / 112.5 (2858)
2WD
Overall Width, with standard wheels or tracks, in (mm) – 72 (1829) to
flanges
Weight
Weight, 2WD w/ROPS, lb (kg) – 7,275 (3300)
Weight, MFD/4WD w/ROPS, lb (kg) – 8,510 (3860)
Weight, 2WD w/Cab, lb (kg) – 7,940 (3600)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 9,170 (4160)
Weight, Total allowable, w/maximum ballast, lb (kg) – 12,192 (5530)
John Deere 673 Loader
Height (to pin) – 140 inches (355 cm)
Clearance, dumped bucket – 99 inches (251 cm)
Dump reach – 43 inches (109 cm)
Dump angle – 75
Reach at ground – 97.1 inches (246 cm)
Rollback angle – 47
Breakout force (at pin) – 7,284 lbs (3304 kg)
Breakout force (at 800mm) – 5,328 lbs (2416 kg)
Breakout force (bucket) – 5,823 lbs (2641 kg)
Lift to full height (at pin) – 3,964 lbs (1798 kg)
Lift to full height (at 800mm) – 2,782 lbs (1261 kg)
Lift to 1.5m (at pin) – 5,536 lbs (2511 kg)
Lift to 1.5m (at 800mm) – 4,246 lbs (1925 kg)
Bucket width – 85 inches (215 cm)
Raise time to height – 6.6 s
Bucket dump time – 5.6 s
Lowering time – 5.8 s
Rollback time – 6.0 s