John Deere 6100 Engine Specifications
Engine Model – John Deere 4045 H PowerTech E, 2V
Cylinders – 4
Displacement, cu in (L) – 276 (4.5)
Engine Bore, in (mm) – 4.193 (106.5)
Engine Stroke, in (mm) – 5.0 (127)
Block Design, Replaceable Liners – Wet liners
Aspiration, Turbocharged or Naturally Aspirated – Turbo, Air-to-Air
Intercooled
Engine Power, Rated, hp (kW) – 98 (72.7)
Maximum Engine Power, hp (kW) – Same as Advertised
Engine Speed, rpm – 2100
Power Boost, hp (kW) – No boost
Fuel Tank, gal (L) – 41.7 (158)
Fuel System Description – High Pressure Common Rail
Fuel System Control – Electronic
Fuel Injection to combustion chamber – Direct
Emission Level – Tier 3
Exhaust Pipe – Vertical
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 90
JD 6100 Transmission
Description – 9F/9R PowrReverser
Transmission Type – Gear
Forward / Reverse Speeds – 9F / 9R
Maximum Speed Forward, mph (kph) – 17.6 (28.3)
Creeper Range – No
Shuttle (Forward-Reverse) – Yes
Optional Transmission
Description – 9F/3R Top Shaft Synchronized
Transmission Type – Gear
Forward / Reverse Speeds – 9F / 3R
John Deere 6100 PTO (Power take off)
PTO Horsepower, hp (kW) – 82 (61.1)
PTO Speeds, rpm – 540 / 1000
PTO operational Type – Independent
Wheels
Drive Wheels – 2WD / 4WD
Steering Configuration – Front Steer
Rear Axle
Final Drive – Planetary / Inboard
Axle Output End – Flange
Axle Bar Diameter, in (mm) – No bar axle
Front Axle and Brakes
Suspended Front Axle – No
Brake Type – Wet Disk
JD 6100 Hydraulic System
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Gear
Standard Pump Flow, gpm (Lpm) – 17.6 (66.6)
Optional Pump Flow, gpm (Lpm) – No option
Standard Remote Valves – 2
Hitch and Drawbar
3-Point Hitch Category – Category 2
Optional Hitch Category – No option
Draft Sensing or Lift Control – Lower link draft sensing
Draft Link Ends Adjustable – Optional
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 6,800 (3084)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No Option
Optional Lift Capacity at lift pin, lb (kg) – No Option
Drawbar Description – Swinging Vertical Offset Drawbar
Wheelbase and Tires
Wheelbase, 2WD, in (mm) – 92.5 (2350)
Wheelbase, 4WD, in (mm) – 92.5 (2350)
Front Tire Size, 2WD – 10.00 -16 6PR F2
Front Tire Size, 4WD – 13.6 -24 6PR R1
Rear Tire Size – 18.4 -34 8PR R1