John Deere 6095MC Engine Specifications
Manufacturer – John Deere Power Systems
Type – PowerTech PWS
Aftertreatment – Cooled exhaust gas recirculation (EGR), Lifetime Diesel
Particulate Filter (DPF)
Diesel Oxidation Catalyst – DOC with Selective
Catalytic Reduction (SCR) – DEF
Engine air filter – PowerCore G2 air filter with pre-cleaning
Aspiration – Wastegate turbocharger
Cylinders / Displacement – 4/4.5l
Cooling system – Cooling system with temperature controlled viscous fan
drive
Fuel injection system and control – High pressure common rail system
with up to 2000 bar injection pressure
Rated power (97/68EC), hp (kW) – 95 (70)
Max. power (97/68EC), hp (kW) – 100 (74)
Rated power (ECE-R24), hp (kW) – 88 (65)
Max. power (ECE-R24), hp (kW) – 95 (70)
Constant power range, rpm 2100 – 1600
Torque reserve, percentage – 35%
Maximum torque, Nm (at 1500 engine rpm) – 429
Rated speed, rpm – 2100
Fuel Tank, L – 177
JD 6095MC Power Take-Off
Rear PTO Type – Electro-hydraulically engaged, oil cooled, multi-disc
design
Engine rpm at rated PTO speeds with 540 – 1932
Engine rpm at rated PTO speeds with 540/1000 – 1932/1932
Engine rpm at rated PTO speeds with 540/540E/1000 – 1932/1575/1932
Front PTO Type – Electro-hydraulically engaged, oil cooled
Engine speed at rated PTO speed (1000), rpm – 1969
John Deere 6095MC Transmission
Standart Transmission – PowrQuad
Type – Fully synchronized
Forward gears – 24
Reverse gears – 24
Gear Speeds – 1.4-40 km/h
Optional Transmission – CommandQuad Plus
Forward gears – 24
Reverse gears – 24
Gear Speeds – 1.4-40 km/h
Mechanical
Suspended front axle – Triple Link Suspension (TLS) MFWD Axle,
hydro-pneumatic, permanently active, triple link, self-levelling
suspension
Suspension range with TLS – 100 mm suspension range
Engagement front differential lock – Self-locking differential
Engagement rear differential lock – Electro-hydraulic with oil cooled
clutch
Rear axle – Flange axle
Steering – Dynamic load sensing, hydrostatic, flow metering
Trailer brake systems – Hydraulic and/or pneumatic system
JD 6095MC Hydraulic System
Type – Pressure Compensated (PC)
Flow at rated engine speed base/option, l/min – 80
Pump Capacity, lpm – 114
Rated Pressure, psi / bar 2900 / 200
Selective control valves – Up to 4 rear + 3mid
Power beyond – Optional
Oil take out capacity with overfill, l – 25
John Deere 6095MC Hitch
Rear Hitch Type – Electronic lower link sensing; load and depth control
Rear Hitch Category – 2/3N
Maximum lift capacity at hooks, kg (base/option) – 3400/4600
Lift capacity through full lift range (OECD 610mm), kg (base/option) –
2150/2950
Lift capacity through full lift range (OECD 1800mm), kg (base/option) –
1300/1800
Front Hitch Type – Controlled by rear SCV
Front Hitch Category – 2
Maximum lift capacity at hooks, kg – 3500
Lift capacity through full lift range (OE CD at the hooks), kg – 2300
JD 6095MC Dimensions
Front tyre sizes, max. available (diameter in cm) – 540/65R24 (134)
Rear tyre sizes, max. available (diameter in cm) – 600/65R38 (178)
Wheelbase, mm – 2400
Width / Height / Length, mm – 2490 / 2754 / 4720
Width / Height / Length, mm (6MC low profile) – 2490 / 2663 / 4720
Ground clearance, mm – 490
Shipping weight, kg – 5500
Maximum permissible gross weight, kg – 8350