John Deere 6095B Engine Specifications
Engine Type – Inline, Mechanical
Engine Model – 4045HCP04
Air Inlet Type – Turbocharged / Intercooled
Cooling Type – Circulating Water Cooling
Number of Cylinders – 4
Bore/Stroke, mm (in) – 106.5/127 (4.19/5)
Displacement, L – 4.5
Engine Power at Rated Speed, kW (hp) – 69.9 (95)
Rated Engine Speed, rpm – 2200
Maximum Engine Torque, Nm (lb-ft) – 375 (276)
Speed at Maximum Torque, rpm – 1600
Slow Idle, rpm – 850-900
Fast Idle, rpm – 2350-2400
Air Cleaner Type – Dry Type with Safety Element
Battery Voltage (V) – 12
Alternator Amperage – 90
Safety Start Type – Neutral Start
JD 6095B Transmission
Transmission Type – unsynchronized gear
Gears – 12 forward and 4 reverse
Clutch – 304.8mm dry disc
Gears Forward / Gears Reverse – 12F/4R
Gears Forward / Gears Reverse (Option) – 24F/12R
John Deere 6095B Power Take-off
Type – Independent
Outer Spline Specifications, mm (in) – 6/21 Spline: 35 (1.38)
Speed, rpm – 540/1000
Transmission Ratio – (112:29) / (95:46)
PTO Output Power, kW – 59.4
Steering and Braking System
Steering System Type – Hydraulic Steering
Steering Pump Type – Open Center and Non-reaction
Braking System Type – Mechanical
JD 6095B Hydraulic System
Type – Open Center, Separated
Hydraulic Pump – Gear Pump
System Pressure, MPa – 19 – 20
Control Modes – Position control, Draft sensing control, Rate of drop
Hydraulic Output Device – Dual SCV or Triple SCV
Hitch Type – Rear Hitch Valve
Three-Point Hitch
Hitch Type – Category 2
Lower Link Type – Fixed Ball Type
Lateral Sway Control – Stabilizer Bar
Lift Capacity@610mm, kN – 24
Drawbar Type – Category 2
Maximum Drawbar Force, kN – 31
Maximum Drawbar Power, kW – 53
Capacities
Fuel Tank L (gal) – 150 (39.62)
Transmission Case, L (gal) – 60 (15.65)
Crankcase, including Filter, L (gal) – 15 (3.96)
MFWD Axle Housing, L (gal) – 5.5 (1.45)
MFWD Wheel Hub, L (gal) – 1.1 (0.29), Each Side
Cooling System, L (gal) – 18 (4.76)
John Deere 6095B Dimensions and Weights
Overall Length, mm (in) – 4650 (183.07)
Overall Width, mm (in) – 2200 (86.61)
Overall Height (to Top of Canopy), mm (in) – 2920 (114.96)
Wheelbase, mm (in) – 2310 (90.94)
Ground Clearance MFWD Differential Bottom, mm (in) – 350 (13.77)
Ground Clearance Drawbar Pin Bottom, mm (in) – 330 (12.99)
Minimum Operating Weight, kg (lb) – 4165 (9182)
Maximum Front Ballasts, kg (lb) – 300 (661)
Maximum Rear Ballasts, kg (lb) – 220 (485)
Turning Radius MFWD on, Minimum, m (ft) – 4.5 (14.76)
Turning Radius MFWD off, Minimum, m (ft) – 4 (13.12)