John Deere 6010 Engine Specifications
Engine Model – 4045DL050
Power, at rated speed – 55 kW (75 hp)
Max. torque at 1200 rpm – 302 Nm (223 lb-ft)
Max. PTO power at rated PTO speed – 48 kW (65 hp)
Number of cylinders – 4
Bore – 106.5 mm (4.19 in.)
Stroke – 127.0 mm (5.00 in.)
Displacement – 4530 cm3 (276 in3)
Firing order – 1-3-4-2
Intake valve clearance – 0.35 mm (0.014 in.)
Exhaust valve clearance – 0.45 mm (0.018 in.)
Slow idle (mechanical injection pump) – 875 to 925 rpm
Slow idle (electronic injection pump) – 840 to 860 rpm
Fast idle (mechanical injection pump) – 2480 to 2510 rpm
Fast idle (electronic injection pump) – 2450 to 2480 rpm
Rated engine speed – 2300 rpm
Working speed range – 1300 to 2300 rpm
Engine speed 540 rpm rear PTO – 2124 rpm
Engine speed 1000 rpm rear PTO – 2208 rpm
Battery – 12 V, 110 Ah or 12 V, 154 Ah
Alternator with overvoltage protection – 14 V, 55 A; 14 V, 90 A or 14 V,
115 A
Starter motor – 12 V, 3.0 kW (4.0 hp)
Battery terminal grounded – negative
JD 6010 Transmission
Type 1 – SyncroPlus transmission
Gear selections – 12 forward gears, 4 reverse gears
Power Reverser – synchronized gears, mechanically actuated
Gear selections – 16 forward gears, 16 reverse gears
Actuation of reverse drive lever – mechanical/hydraulic, under load,
without operating the clutch
Type 2 – PowrQuad transmission (planetary gears, hydraulically actuated)
Gear selections – 16, 20 or 24 forward gears, 12, 16, 20 or 24 reverse
gears
Actuation of reverse drive lever – mechanical/hydraulic, under load,
without operating the clutch
Clutch – electric/hydraulic
Type 3 – AutoPowr transmission (infinitely variable mechanical/hydraulic
transmission)
Speed ranges – 0.05 – 40 km/h (0.03 – 25 mph) or 0.05 – 50 km/h (0.03 –
31 mph)
Change of direction of travel – electrical, under load, without
operating clutch
John Deere 6010 Hydraulic System
Hydraulic System Type – Load-Sensing system with fixed-displacement pump
Pump type – gear-type pump
System pressure minimal (stand-by) – 1500 kPa (15 bar; 220 psi)
System pressure maximal – 20000 kPa (200 bar; 2900 psi)
Steering system – hydrostatic
JD 6010 Capacities
Fuel tank – 116 l (30.6 U.S.gal.)
Cooling system (tractors without cab/with cab) – 11.0 l (2.9
U.S.gal.)/13.5 l (3.6 U.S.gal.)
Crankcase with filter – 12 l (3.2 U.S.gal.)
SyncroPlus transmission with 12/4 gears – 52 l (13.7 U.S.gal.)
Power Reverser with 16/16 gears – 52 l (13.7 U.S.gal.)
PowrQuad transmission with 16/16 or 16/12 gears – 49 l (12.9 U.S.gal.)
Axle housing (APL/AS 2025 front-wheel drive axle w/o TLS) – 5.0 l (1.3
U.S.gal.)
Final drive housing (APL/AS 2025 front-wheel drive axle w/o TLS) – 0.8 l
(0.2 U.S.gal.)
John Deere 6010 Loads and Weights
Maximum permissible static vertical load on swinging drawbar
(transport, 250 mm; 9.8 in.)
tractors without front-wheel drive – 1400 kg (3085 lb)
tractors with front-wheel drive – 1600 kg (3525 lb)
Maximum permissible static vertical load on swinging drawbar
(operating position)
extended 250 mm (9.8 in.) – 2250 kg (4960 lb)
extended 350 mm (13.8 in.) – 1400 kg (3085 lb)
extended 400 mm (15.7 in.) – 1200 kg (2645 lb)
extended 550 mm (21.7 in.) – 800 kg (1765 lb)
Maximum permissible static vertical load on trailer hitch
pin diameter 30 mm (1.2 in.) – 1600 kg (3525 lb)
pin diameter 38 mm (1.5 in) – 1000 kg (2205 lb)
Maximum permissible static vertical load on hook of pick-up hitch – 3000
kg (6615 lb)
Maximum permissible front axle load (without FWD)
normal operation – 2050 kg ( 4520 lb)
with front loader (no weight at 3-point hitch) – 5000 kg (11025 lb)
with front loader (600 kg; 1322 lb at 3-point hitch) – 5300 kg (11685
lb)
with front-end attachments – 3200 kg (7055 lb)
Maximum permissible front axle load (with FWD)
normal operation – 3000 kg (6610 lb)
with front loader (no weight at 3-point hitch) – 5200 kg (11465 lb)
with front-end attachments – 3600 kg (7935 lb)
with front loader (600 kg; 1322 lb at 3-point hitch) – 5500 kg (12125
lb)
Maximum permissible rear axle load – 5600 kg (12345 lb)
Maximum permissible total weight – 7000 kg (15430 lb)