John Deere 5605 Engine
Engine Model ………………. John Deere 4045D
Engine Type ………………. 4-Stroke, direct injection liquid-cooled diesel
Number of Cylinders ………………. 4
Displacement, cu in (L) ………………. 276 (4.50)
Engine Bore, in (mm) ………………. 4.15 (105.0)
Engine Stroke, in (mm) ………………. 5.00 (127.0)
Aspiration ………………. Natural
Rated Engine Power, hp (kW) ………………. 75.0 (55.9)
Rated Engine Speed, rpm ………………. 2400
Maximum Torque, Nm (ft-lbs) ………………. 265 (196)
Torque Speed, rpm ………………. 1600
Low Idle Speed, rpm ………………. 800
Fast Idle Speed, rpm ………………. 2600
Compression Ratio ………………. 17.8:1
Firing Order ………………. 1-3-4-2
Fuel System ………………. Direct Injection
Governor Type ………………. Mechanical
Valve Clearance, in (mm) ………………. 0.014 (0.35)
Fuel Tank Capacity, gal (L) ………………. 27.7 (104.8)
Oil Capacity, qts (L) ………………. 12.7 (12.0)
Coolant Capacity, qts (L) ………………. 15.9 (15.0)
Electrical System Rating, Volts ………………. 12
Charging System ………………. Alternator
Alternator Rating, Amps ………………. 52
JD 5605 Power Take Off
PTO Operational Type ………………. Independent
PTO Horsepower, hp (kW) ………………. 65.0 (48.5)
PTO Clutch ………………. Mechanical dry disc
PTO Speed, rpm ………………. 540/540E
PTO / Engine Speed, rpm ………………. 540/2400
PTO / Engine Speed, rpm ………………. 540E/1700
Transmission Configuration
Transmission Type ………………. Top Shaft Synchronized (TSS)
Gearbox Type ………………. 9F/3R, gear
Number of Forward Gears ………………. 9
Number of Reverse Gears ………………. 3
Clutch Type ………………. Dry disc
Oil Capacity, qts (L) ………………. 42.3 (40.0)
Maximum Forward Speed, mph (kph) ………………. 17.9 (28.8)
Maximum Reverse Speed, mph (kph) ………………. 12.7 (20.4)
John Deere 5605 Wheels and Tires
Drive Wheels ………………. 2WD/4WD
Steering Configuration ………………. Front steer
Steering System ………………. Hydrostatic power
Brakes Type ………………. Self-adjusting wet disc
Front Tire Size (2WD) ………………. 7.50×16
Rear Tire Size (2WD) ………………. 18.4×30
Front Tire Size (4WD) ………………. 12.4×24
Rear Tire Size (4WD) ………………. 13.6×38
Front Tread, in (mm) ………………. 45.7-78.7 (1160-1990)
Rear Tread, in (mm) ………………. 55.1-70.9 (1390-1800)
JD 5605 Hydraulic System
Hydraulic System Type ………………. Open Center
Hydraulic Pump Type ………………. Gear
Implement Pump Flow, gpm (Lpm) ………………. 11.4 (43.0)
Steering Pump Flow, gpm (Lpm) ………………. 6.9 (26.1)
Hydraulic Pressure, Bar (psi) ………………. 190 (2755)
Hydraulic Fluid Capacity, gal (L) ………………. 10.6 (40.0)
Number of Standard Remote Valves ………………. 2
3-Point Hitch Category ………………. 2
Draft Sensing or Lift Control ………………. Position and depth control
Standard Lift Capacity 24-in (610mm) behind pin, lb (kg) ………………. 3970 (1800)
Standard Lift Capacity at lift pin, lb (kg) ………………. 6805 (3085)
Dimensions and Weight
Wheelbase, in (mm) ………………. 85.7 (2175)
Length, in (mm) ………………. 151.6 (3850)
Height, in (mm) ………………. 103.1 (2610)
Turning Radius (2WD, with Brake), in (mm) ………………. 140.5 (3555)
Turning Radius (4WD, with Brake), in (mm) ………………. 160 (4050)
Weight (2WD), lb (kg) ………………. 5950 (2700)
Weight (4WD), lb (kg) ………………. 6395 (2900)
Weight (Maximum), lb (kg) ………………. 9920 (4500)