John Deere 5420 Engine Specifications
Engine Model – 4045D, Naturally Aspirated
Factory Observed PTO Power – 48.8 kW (65 hp) at 2400 rpm
Maximum Engine Torque – 243 Nm at 1400 rpm
Cylinders – 4
Bore – 106.5 mm (4.19 in.)
Stroke – 127 mm (5.0 in.)
Displacement – 4.5 L (278 cu. in.)
Compression Ratio – 17.6:1
Cylinder Firing Order – 1-3-4-2
Intake Valve Clearance – 0.35 mm (0.014 in.)
Exhaust Valve Clearance – 0.45 mm (0.018 in.)
Slow Idle Speed – 825 ± 25 rpm
Fast Idle Speed – 2625 ± 25 rpm
Operating Range Speed – 1600-2400 rpm
Injection Pump Timing Position – 9° BTDC (TimeTrac)
Electrical System – 12-Volt, Negative Ground
Battery Voltage – 12-volt
Cold Cranking Amps – 700 CCA / 950 CCA
Battery BCI Group Size – 31
Alternator-Straddle Mount – 40 amps / 60 amps
John Deere 5420 Power Take-Off
PTO Type (Standard) – Fully Independent PTO (540)
Operational – SyncShuttle hiftable 540/540E Independent
Clutch – Lever Operated
Engine-540E (SyncShuttle) Speed – 1700 rpm
Engine-540 Speed – 2400 rpm
PTO Shaft (Length) – 86 mm (3.4 in.)
Transmission
Standard Transmission – 9/3 CollarShift Transmission
Optional Transmission – 9/3 SyncShuttle, 9/3 SyncShuttle with shiftable
540/540E PTO or 12/12 PowrReverser
Lever Gear Selector
Manual Shift
Brakes – Hydraulic, Wet, Self-Adjusting, Self-Equalizing
JD 5420 Hydraulic System
Type – Open Center
Pump – Tandem Gear
Power Steering – Hydrostatic
Pump Displacement-Steering – 11.9 cu cm (0.73 cu in.)
Pump Displacement-Implement – 28.8 cu cm (1.76 cu in.)
Steering Flow Rate – 24.9 L/min (6.6 gpm)
Implement Flow Rate – 60.1 L/min (15.9 gpm)
Steering (Maximum) Pressure – 12 997-13 500 kPa (130-135 bar) (1885-1955
psi)
Implement (Maximum) Pressure – 18 995-19 692 kPa (190-197 bar)
(2755-2855 psi)
Hitch Lift Capacity – 1530 kg (3374 lb)
SCV Flow Rate – 60.1 L/min (15.9 gpm)
Three-Point Hitch
Hitch Categories – 1 and 2
Top Link Sensing
Standard – Fixed Draft Links with Interchangeable Balls
Optional – Telescopic Draft Links with Interchangeable Balls
Lift Capacity at 610 mm (24 in.) Behind Hitch Balls Capacity – 1530 kg
(3374 lb)
John Deere 5420 Capacities
Fuel Tank – 68 L (18 gal)
Cooling System 5220 and 5320 – 10.8 L (11.4 qt)
Crankcase (including filter change) – 8.5 L (9 qt)
Transmission/Hydraulic System (Dry Clutch, CollarShift/SyncShuttle) – 38
L (10 gal) / 64 L (17 gal) Hi-Crop
Transmission/Hydraulic System (Wet Clutch, PowrReverser) – 43.5 L (11.5
gal) / 70 L (18.5 gal) Hi-Crop
MFWD Differential Housing Axle Oil – 5 L (5.2 qt)
Wheel Hub Axle Oil (Each) – 0.7 L (0.74 qt)
Assembly Axle Oil – 6.2 L (6.6 qt)
JD 5420 Dimension
Wheel Base (2WD/MFWD), mm (in.) – 2159 (85) / 2184 (86)
Overall Length Including Draft Links (2WD/MFWD), mm (in.) – 3696 (145.5)
/ 3759 (148)
Overall Width Outside Edge of Tires (55.8 in. Tread Setting), mm (in.) –
1763 (69)
Overall Width Outside Edge of Tires (61.5 in. Tread Setting), mm (in.) –
1991 (78)
Overall Width Rear Axle Flange-to-Rear Axle Flange, mm (in.) – 1455 (57)
Cab Width (Glass), mm (in.) – 1549 (61)
Cab Width (Across Fenders), mm (in.) – 1801 (71)
Cab Width (Cab Roof), mm (in.) – 1707 (67)
Ground-to-Cab Top, mm (in.) – 2550 (100)
Rear Axle Centerline-to-Cab Top, mm (in.) – 1877 (74)
Crop Clearance (2WD/MFWD), mm (in.) – 483 (19) / 400 (15.75)
Ground-to-Drawbar Top, mm (in.) – 514 (20.25)
Drawbar Thickness, mm (in.) – 33.0 (1.3)
Front Axle Centerline-to-Hood Top (2WD/MFWD), mm (in.) – 1003.3 (39.5) /
911.7 (35.5)
Turning Radius with Brakes (2WD/MFWD), mm (in.) – 2957 (116.4) / 3109
(122.4)
Turning Radius without Brakes (2WD/MFWD), mm (in.) – 3444 (135.6) / 3810
(150.0)
Shipping Weight (2WD/MFWD) – 2585 kg (5700 lb) / 3057 kg (6740 lb)
Attachments
John Deere 521 Loader
Height (to pin) – 122 inches (309 cm)
Clearance, dumped bucket – 99.8 inches (253 cm)
Dump reach – 20.2 inches (51 cm)
Dump angle – 37.4
Reach at ground – 62 inches (157 cm)
Rollback at ground – 24
Breakout force (at pin) – 3485 lbs (1580 kg)
Lift to full height (at pin) – 2500 lbs (1134 kg)
Bucket width – 61 inches (154 cm)
John Deere 49 Backhoe
Backhoe Weight – 1533 lbs (695 kg)
Transport height – 94 inches (238 cm)
2-Foot flat digging depth – 115 inches (292 cm)
Reach from pivot – 149 inches (378 cm)
Loading height – 92 inches (233 cm)
Bucket Rotation – 180
Swing Arc – 180
Bucket force – 4575 lbs (2075 kg)
Dipperstick force – 3175 lbs (1440 kg)