Engine Specifications
Advertised Engine Power, Rated, hp (kW) – 85 (63)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – 2200
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 30 (114) Open ROPS; 36 (136) Cab
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Engine Model – John Deere PowerTech PWX 4.5L
Number of Cylinders – 4
Displacement, cu in (L) – 276 (4.5)
Engine Bore, in (mm) – 4.17 (106)
Engine Stroke, in (mm) – 5.0 (127)
Block Design, Replaceable Liners – Wet replaceable
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged,
air-to-air aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4 Interim
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – Cooled EGR
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – DPF standard
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 90 standard; 120 optional
John Deere 5085M PTO
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 70 (52 ) @ 2100
rpm
PTO Speeds, rpm – 540 / 540E / 1000
PTO operational Type (Independent; Live; Continuous) – Independent
JD 5085M Transmission
Manufacturer’s Description – 16F/16R PowrReverser
Transmission Type – Electrohydraulic reverser
Number of Forward / Reverse Speeds – 16F / 16R
Maximum Speed Forward, mph (kph) – np
Creeper Range Available – Yes
Shuttle (Forward-Reverse) Available – Standard
Optional Transmissions
Manufacturer’s Description – 12F / 4R SyncShuttle Plus
Transmission Type – Synchro shuttle
Number of Forward / Reverse Speeds – 12F / 4R
Manufacturer’s Description – 32F/16R PowrReverser Plus
Transmission Type – Hydraulic wet F & R clutches
Number of Forward / Reverse Speeds – 32F / 16R
JD 5085M Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 2WD
/ 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase, 2WD, in (mm) – 90.6 (2301)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 90.6 (2301)
Front Tire Size, 2WD – 11L-15, 8 ply, F2
Front Tire Size orTrack Width, MFD/4WD or Track – 11.2-24, 6PR, R1
Rear Tire Size or Track Width – 16.9-30, 6 ply, R1
John Deere 5085M Axles and Brakes
Final Drive Location and Description – Inboard Planetary
Rear Axle Output End, Flange or Bar – Flange
Rear Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet disk
Hydraulic System
Hydraulic System Type – Open center
Main Hydraulic Pump Type – Tandem gear
Implement Pump Flow, gpm (Lpm) – 18.4 (70)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – Dual std; Triple opt.
JD 5085M 3-Point Hitch Features
3-Point Hitch Category – Category 2
Optional Hitch Category – Category 2 to Cat. 1 conversion
Draft Sensing or Lift Control – Draft sensing, lower link
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 4,630 (2100)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 5,622 (2550)
Standard Lift Capacity at lift pin, lb (kg) – np
Optional Lift Capacity at lift pin, lb (kg) – np
Drawbar Description – Extendable, swinging
John Deere 5085M Dimensions and Weight
Length, 2WD, incl. Hitch/Drawbar, in (mm) – 159 (4040)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 159 (4040)
Height to Top of Cab, in (mm) – 99.5 (2527)
Height to Top of ROPS raised, in (mm) – 96.5 (2451)
Overall Width, with standard wheels or tracks, in (mm) – np
Weight, 2WD w/ROPS, lb (kg) – 7,100 (3220)
Weight, MFD/4WD w/ROPS, lb (kg) – 7,600 (3450)
Weight, 2WD w/Cab, lb (kg) – 8,000 (3630)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 8,500 (3856)
Weight, Total allowable, w/maximum ballast, lb (kg) – 13,095 (5940)