John Deere 5075M Specs

Engine Specifications

Engine Model – John Deere PowerTech 5030
Number of Cylinders – 5
Displacement, cu in (L) – 186 (3.05)
Engine Bore, in (mm) – 3.39 (86)
Engine Stroke, in (mm) – 4.13 (105)
Block Design, Replaceable Liners – Parent bore
Advertised Engine Power, Rated, hp (kW) – 75 (55.9)
Maximum Engine Power, hp (kW) – Same as Advertised
Rated Engine Speed, rpm – 2200
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 21 (80) OOS / 30 (114) Cab
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged
Fuel System Description – Electronic Unit Pump System
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – No
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – No
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 70 (OOS) / 90 (Cab)

John Deere 5075M PTO

PTO Horsepower, Basic / Optional Transmission, hp (kW) – 60 (44.7) @
2100 rpm
PTO Speeds, rpm – 540 / 540E / 1000
PTO operational Type (Independent; Live; Continuous) – Independent

Transmission

Manufacturer’s Description – 16F/16R PowrReverser
Transmission Type – Electrohydraulic reverser
Number of Forward / Reverse Speeds – 16F / 16R
Maximum Speed Forward, mph (kph) – 23.68 (37.9)
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – Standard

Manufacturer’s Description – 12F / 4R SyncShuttle Plus
Transmission Type – Synchro shuttle
Number of Forward / Reverse Speeds – 12F / 4R

Manufacturer’s Description – 32F/16R PowrReverser Plus
Transmission Type – Hydraulic wet F & R clutches
Number of Forward / Reverse Speeds – 32F / 16R

JD 5075M Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 2WD
/ 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase, 2WD, in (mm) – 85.6 (2174)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 85.6 (2174)
Front Tire Size, 2WD – 11L-15, 8 ply, F2
Front Tire Size orTrack Width, MFD/4WD or Track – 11.2-24, 6PR R1
Rear Tire Size or Track Width – 16.9-30, 6PR R1

John Deere 5075M Axles and Brakes

Final Drive Location and Description – Planetary / Inboard
Rear Axle Output End, Flange or Bar – Flange
Rear Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet Disk

JD 5075M Hydraulic System

Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Gear
Implement Pump Flow, gpm (Lpm) – 14.6 (55)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – Dual std; Triple opt.

3-Point Hitch

3-Point Hitch Category – Category 2
Optional Hitch Category – Category 2 Convertible to 1
Draft Sensing or Lift Control – Draft sensing, lower link
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 4,630 (2100)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 5,622 (2550)
Standard Lift Capacity at lift pin, lb (kg) – np
Optional Lift Capacity at lift pin, lb (kg) – np
Drawbar Description – Extendable, swinging

John Deere 5075M Dimensions and Weight

Length, 2WD, incl. Hitch/Drawbar, in (mm) – 150 (3810)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 150 (3810)
Height to Top of Cab, in (mm) – 99.5 (2527)
Height to Top of ROPS raised, in (mm) – 96.5 (2451)
Overall Width, with standard wheels or tracks, in (mm) – np
Weight, 2WD w/ROPS, lb (kg) – 6,300 (2858)
Weight, MFD/4WD w/ROPS, lb (kg) – 6,700 (3039)
Weight, 2WD w/Cab, lb (kg) – 7,400 (3357)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 7,800 (3538)
Weight, Total allowable, w/maximum ballast, lb (kg) – 13,095 (5940)

Leave a Comment