John Deere 5075GN Engine Specifications
Engine Make – FPT
Engine Model – F5DFL413C-E
Number of Cylinders – 4
Displacement, cu in (L) – 207 (3.4)
Engine Bore, in (mm) – 3.90 (99)
Engine Stroke, in (mm) – 4.33 (110)
Advertised Engine Power, Rated, hp (kW) – 75 (55)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – 2300
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 22.7 (86) std; 7.5 (28) auxiliary opt.
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – 2.7 (10.3)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4 Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – SCR
with DEF
Exhaust Gas Recirculation (EGR) – Cooled EGR
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – Passive, automatic
Exhaust Pipe, Vertical stack or Horizontal – Horizontal std; vertical
stack opt.
Cooling System Fan Drive Type – Viscous
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 95
Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 61 (45.5)
PTO Speeds, rpm – 540 / 540E
PTO operational Type (Independent; Live; Continuous) – Independent
JD 5075GN Transmission
Manufacturer’s Description – 12F/12R SyncReverser
Transmission Type – 3 ranges, 4 speeds
Number of Forward / Reverse Speeds – 12F / 12R
Maximum Speed Forward, mph (kph) – 18.6 (30)
Creeper Range Available – See 24F/12R option
Shuttle (Forward-Reverse) Available – Synchronized reverser
Manufacturer’s Description – 24F/12R PowrReverser w/Creeper
Transmission Type – Hi-Lo and power reverser
Number of Forward / Reverse Speeds – 24F / 12R
John Deere 5075GN Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 2WD
/ 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase, 2WD, in (mm) – 82.6 (2098)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 82.6 (2098)
Front Tire Size, 2WD – 6.00-16 or 6.50-16
Front Tire Size orTrack Width, MFD/4WD or Track – 6.00-16 or 6.50-16
Rear Tire Size or Track Width – 280/85 R28
Axles and Brakes
Final Drive Location and Description – Inboard planetary
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet disk
JD 5075GN Hydraulics and Hitch
Hydraulic System Type – Open center
Main Hydraulic Pump Type – Two standard; third optional
Implement Pump Flow, gpm (Lpm) – 17.1 (64.7) plus 7.6 (28.9)
Optional Pump Flow, gpm (Lpm) – 7.6 (28.9) third pump
Number of Standard Remote Valves – 2 std; 3rd or 4th opt.
3-Point Hitch Category – Category 2
Optional Hitch Category – Category 1 or 1N
Draft Sensing or Lift Control – Center link draft sensing
Draft Link Ends Telescopic – Optional
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 3,593 (1630)
Standard Lift Capacity at lift pin, lb (kg) – 5,290 (2400)
Optional Lift Capacity at lift pin, lb (kg) – 6,700 (3040)
Drawbar Description – Swinging, extendable
John Deere 5075GN Dimensions and Weights
Length, 2WD, incl. Hitch/Drawbar, in (mm) – 170 (4319)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 170 (4319)
Height to Top of Cab, in (mm) – 93.3 (2371)
Height to Top of ROPS raised, in (mm) – 98 (2490)
Overall Width, with standard wheels or tracks, in (mm) – 49.5 (1257)
minimum; 70.3 (1785) maximum
Weight, 2WD w/ROPS, lb (kg) – 5,567 (2525)
Weight, MFD/4WD w/ROPS, lb (kg) – 5,864 (2660)
Weight, 2WD w/Cab, lb (kg) – 6,272 (2845)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 6,559 (2975)
Weight, Total allowable, w/maximum ballast, lb (kg) – 9,259 (4200) 2WD;
9,700 (4400) 4WD