John Deere 5060E Engine Specifications
Engine Model – John Deere PowerTech 3029H
Engine Power at Rated Speed – 44.13 kW (59 hp)
Engine Type – In-line Diesel Engine, Four Stroke
Aspiration – Turbocharged with Charge Air Cooler
Number of Cylinders – 3
Displacement – 2.9 L
Compression Ratio – 16.9:1
Low Idle Speed – 850 rpm
Rated Engine Speed – 2400 rpm
Engine Maximum Speed – 2600 rpm
Torque Bulge – 25%
Maximum Torque – 220.9 Nm (162.9 lb-ft)
Speed at Maximum Torque – 1400 rpm
Injection Pump – Piston Injection Pump
Fuel Transfer Pump – Mechanical or Electric
Filtering System – Two-stage with Water Separator / Three-stage with
Water Separator
Voltage – 12 V
Alternator Capacity – 90 A
Battery Type – Sealed (unserviceable)
Battery Capacity – 100 Ah
Starter Motor – 2.8 kW
Worklights (Standard) – Halogen
Worklights (Premium) – LED
John Deere 5060E Power Take-Off
Type – Independent
Actuation – Mechanical
PTO Power at Engine Rated Speed – 33.2 kW (44.82 hp)
PTO Rated Speed – 540 rpm
Engine Speed at PTO Rated Speed – 2083 rpm
Engine Speed at PTO-E Rated Speed – 1588 rpm
John Deere 5060E Transmission
Standard Transmission – Top Shaft Synchronized
Number of Gears – 9 Foward / 3 Reverse
Foward Speeds, km/h (mph) – 2.3 (1.4) – 28.8 (17.9)
Revers Speeds, km/h (mph) – 3.2 (1.9) – 20.4 (12.7)
Optional Transmission – PowrReverser
Number of Gears – 12 Foward / 12 Reverse
Foward Speeds, km/h (mph) – 1.7 (1.1) – 35.1 (21.8)
Revers Speeds, km/h (mph) – 1.8 (1.2) – 38.3 (23.8)
Clutch – Mechanical or Eletro-hydraulic
Clutch Type – Double Disk
Diameter of Disk – 280 mm (11 in)
JD 5060E Axles and Brakes
Front Axles Type – 4×4
Activation – Mechanical
Suspension – No
Differential Lock – Automatic
Limited-slip Differential – Yes
Work Pressure – 15 000 kPa (150 bar) (2175.6 psi)
Rear Axle Type – Flanged
Rear Axle Final Drive – Planetary, Internally Mounted
Differential Lock – Mechanical
Service Brake – Disk-in-Oil Bath, Auto-adjustable, Hydraulically
Actuated
Park Brake – Transmission Lock, Engaged by Gearshift Lever
John Deere 5060E Hydraulic System and Hitch
Hydraulic System Type – Open Center
Pump Type – Gear Pump
Pump Flow Rate – 43 L/min (11.4 gal/min)
Maximum Pressure – 20 000 kPa (200 bar) (2900 psi)
Steering System – Hydrostatic System with Exclusive Pump
Steering Pump Flow Rate – 26 L/min (6.9 gal/min)
Standard Selective Control Valves – 2 SCV
Optional Stackable Selective Control Valves – 2 SCV / 3 SCV
Rear Hitch Category – 2, Ball Joint Type
Sensor – Center Link
Lifting Capacity on Ball Joints – 1890 kgf/2140 kgf
Lifting Capacity at 610 mm (2 ft) of Hitch (NBR13145) – 1800 kgf/2025
kgf
Wheel Configurations
Front Tires – 12.4-24 R1 6PR
Front Tires – 9.5-24 R1 – 6PR
Front Tires – 9.5-24 R1 – 6PR
Rear Tires – 13.6-38 R1 FL 6PR
Rear Tires – 14.9-28 R2 6PR FL
Rear Tires – 14.9-28 R1 8PR FL
JD 5060E Capacities
Fuel Tank (OOS / Cab ) – 115 L (30.38 gal) / 125 L (33.02 gal)
Cooling System – 11 L (2.9 gal)
Engine Oil (with Filter) – 11 L (2.9 gal)
Transmission/Hydraulic System (Top Shaft Synchronized) – 40 L (10.57
gal)
Transmission/Hydraulic System (PowrReverser) – 43.5 L (114.91 gal)
Front Axle Total Capacity – 5.6 L (14.79 gal)
Front Axle Differential Housing – 4 L (1.06 gal)
Front Axle Final Drive Housing (each) – 0.8 L (2.11 gal)
Dimensions and Weights
Wheel Base – 2050 mm (6.73 ft)
Total Length without Front Weights and Pickup Hitch – 3331 mm (10.95 ft)
Total Length with Front Weights and Pickup Hitch – 4080 mm (13.40 ft)
Maximum Height – 2604 mm (8.55 ft)
Width of the Flanged Rear Axle – 1454 mm (4.80 ft)
Machine Total Weight without Ballast – 2640 kg (5820 lb)
Maximum Weight with Ballast – 3650 kg (8046 lb)