John Deere 5058E Engine Specifications
Engine Type – Disel Stage III B
Engine Model – PowerTech 3029 H
PTO HP (kW) @ rated speed (IOOS) – 45 (33.6) @ 2100 rpm
PTO HP (kW) @ rated speed (CAB) – 41 (30.6) @ 2100 rpm
Rated ERPM – 2100
Nominal Engine Torque – 247 Nm @ 1500 rpm
Maximum Torque @ Engine Speed – 1500 rpm
No. of cylinders – 3
Bore, mm – 106.5
Stroke, mm – 110
Displacement, Liters – 2.9
Number of Valves Per Cylinder – 2
Fuel Injection System and Control – Electronically Controlled High
Pressure Common Rail Fuel System
After Treatment Type – Diesel Oxidation Catalyst (DOC) and diesel
Particulate Exhaust Filter (DPF)
Compression Ratio – 16.9 : 1
Firing Order – 1-2-3
Low Idle, rpm – 890-910
High Idle, rpm – 2190-2210
Operating Range, rpm – 1700-2100
Fuel Shut Off – Electric
Cold Start – Available
Cooling Package – Liquid cooled with overflow reservoir
Cooling System – With Temperature Controlled Viscous Fan Drive
Fan – Eco Fan Drive
Radiator – 56 mm
Aspiration – Turbo and Aftercooled
Combustion – Direct injection
FIP – Rotary
Muffler – Under hood
Air Cleaner – FKB 07
Air Cleaner Type – Dual Dry Air Filter
Engine shut off – Electrical shut off
Fuel tank – Mid fill, Under Platform
Electrical System
Battery voltage – 12 V
Battery Cold Cranking Amps – 800 CCA
Ampere Rating – 85 Ah
Alternator – 110 Amp
Starter – 12 V, 2.4 kW
John Deere 5058E Transmission
Transmission Type – 9F/3R SyncShuttle
No of speeds – 9 Forward Speeds / 3 Reverse Speeds
Transmission Type – 12F/12R PowrReverser
No of speeds – 12 Forward Speeds / 12 Reverse Speeds
Transmission Type – 24F/12R PowrReverser
No of speeds – 24 Forward Speeds / 12 Reverse Speeds
Shift Pattern – H
Clutch Type – Dual
Clutch size (in) – 11″
Material of traction clutch plate – Cerametallic
Service brake – Hydraulic actuated oil immersed disk brake.
Park Brake – Park Pawl
Secondary Brake – Hydraulic operated secondary brake
Brake Type – Dual stage hydraulic brake valve
Trailer brake – Optional
Material of PTO clutch plate – Cerametallic
Gear shifter location – Right-hand side
John Deere 5058E PTO
Clutch Type – Single disc dry clutch (Only for 9X3) / Multi disc wet
clutch (with 12×12 PR & 24x12PR)
Control Type – Mechanical engagement (9×3) / Electrohydraulic engagement
(12×12 PR & 24x12PR)
Shaft Diameter – 34.8 mm
Splines – 6
PTO Standard – 540 @ 2084 engine rpm
PTO Economy – 540E @ 1588 engine rpm
Differential lock – Standard, Pedal operated
Rear axle – 10 Series
JD 5058E Hydraulic system
System Type – Open Center Hydraulic System
System Pressure (Maximum) – 205 bar
Base Pump (Steering and Transmission Control) – 12 cm3
Base Pump Delivery Rate Per Minute at Rated Speed – 22.7 L (5.996
gal/min)
Main pump (SCV and Hitch) – 23 cm3
Main pump Delivery Rate Per Minute at Rated Speed – 43.5 L (11.491
gal/min)
Maximum No. of SCV’s CAB (Rear/Mid) – 2/2
Maximum No. of SCV’s IOOS (rear/mid) – 2/2
Maximum No. of SCV Ports (rear/mid) CAB – 4/4
Maximum No. of SCV Ports (rear/mid) IOOS – 4/4
Rockshaft and SCV
Rockshaft Make – JD
Control Valve Make – Eaton
SCV Makes – Eaton
Rock Shaft Control Valve Pressure, Bar – 195±5
Controls – Draft and position
External Tapping For Return Line – Available
Rate Of Drop – Available
Power Beyond – Optional as kit
SCV – Standard with neutral lock
John Deere 5058E Hitch
Hitch Type – Rear
Hitch Category – 2
Lower Link Type – Ball Type
Control Type – EQRL (Quick Raise/Lower) & Mechanical Hitch Control
Levers
Sensing Type – Top Link Draft Sensing
Maximum Lift Capacity @ Hitching Point – 1800 kg
Maximum Lift Capacity @ Hitching Point through the Travel – 1800 kg
Maximum Lift Capacity @ 610 mm Behind Hitching Point – 1450 kg
Max. Lift Capacity @ 610 mm Behind Hitching Point Through The Travel –
1450 kg
Lift capacity at 24″ behind hitch balls, kg – 1450
Steering System
Type – Power Steering
Steering column (9F/3R SyncShuttle) – Standard, Non-Collapsible, and
Not-tilt able
Steering column (12F/12R PowrReverser) – Standard, Non-Collapsible and
with Tilt option
Steering column (24F/12R PowrReverser) – Standard, Non-Collapsible and
with Tilt option
Steering wheel (Wheel diameter / Rim diameter), mm – 406 / 26.2
Steering valve Isolators – Available
Steering pressure, bar – 130-135 bar
JD 5058E Wheels and Tires
Front Tire – 280/85R20 (11.2R20)
Front Tire – 320/85R20 (12.4R20)
Front Tire – 250/85R24 (9.5R24)
Front Tire – 210/95R28 (8.3R28)
Rear Tire – 340/85R28 (13.6R28)
Rear Tire – 380/85R28 (14.9R28)
Rear Tire – 420/85R30 (16.9R30)
Rear Tire – 160/95R46 (6.6R46)
Capacities
Fuel Tank (IOOS/Cab) – 82 ± 4 L (21.66 ± 1 gal) / 82 ± 4 L (21.66 ± 1
gal)
Engine Sump – 8.5 L
Transmission (SyncShuttle), 9X3 – 38 L
Transmission (PowrReverser), 12X12 – 43 L
Transmission (PowrReverser), 24X12 – 45.5 L
Cooling System IOOS – 9
Cooling System CAB – 12.5
Mechanical Front Wheel Drive (MFWD) Axle
MFWD Differential Housing – 4.5 L
MFWD Wheel Hub (Each) – 0.7 L
John Deere 5058E Dimension
Wheelbase, mm – 2050
Total Length including Front weight support and Drawbar, mm – 3695
Total Length including Hood & Drawbar, mm – 3640
Height Center of Rear Axle to top of CAB Roof, mm – 1760
Turning Radius with Brake, mm (DANA Axle) – 3940
Turning Radius with Brake, mm (Carraro Axle) – 3150
Turning Radius without Brake, mm (DANA Axle) – 4650
Turning Radius without Brake, mm (Carraro Axle) – 3900
Turning Radius MFWD Engaged with Brakes – 3940 mm
Turning Radius MFWD Engaged without Brakes – 4650 mm