JD 5050D Engine Specifications
Engine Model – 3029T Naturally Aspirated
Declared PTO Power – 31 kW (41.5 hp.)
Rated Engine rpm – 2100
Maximum Engine Torque – 192 Nm @ 1200 rpm
Cylinders – 3
Bore – 106.5 mm
Stroke – 110 mm
Displacement – 2.9 L
Compression Ratio – 18.5:1
Firing Order – 1-2-3
Low Idle – 850±50 rpm
Fast Idle – 2300±50 rpm
Operating Range – 1400-2100 Erpm
Working Range – 800-2350 Erpm
Injection Pump Timing – 10° BTDC
Fuel Tank – 60 L
Engine Sump – 8.5 L
Battery – 12 V, 88 Ah
Alternator – 42 Amp
Starter – 12 V, 2.5 kW
John Deere 5050D Transmission
Transmission Type – Collar Shift Gearbox
Clutch Type – Single/Dual (Opt.)
Forward Gears – 8
Reverse Gears – 4
Forward Speeds – 2.85-30.88 km/h
Reverse Speeds – 3.77-13.63 km/h
Transmission (Grease Axle/Oil Axle) – 30L / 32L
John Deere 5050D Power Take-off
Rear PTO – Independent, 6 Splines
Standard PTO Speed – 540 @ 2100 Erpm
Economy PTO Speed – 540 @ 1600 Erpm
PTO (claimed) – 42 hp (31.3 kW)
JD 5050D Mechanical
Chassis – 4×2 2WD/4WD MFWD
Steering – Power Steering
MFWD Housing Axle Oil – 5.9 L
Brakes Type – Wet Disc
Actuation – Mechanical
Park Brake – Park Pawl
Handbrake – Available
Cab – Open operator station
John Deere 5050D Hydraulics and Hitch
Hydraulic System Type – Open center
Pump flow – 6.6 gpm (25.0 lpm)
Steering flow – 6.6 gpm (25.0 lpm)
Total flow (with 90% Efficiency) – 36.1 L/min.
Lifting Capacity – 1400 kgf
Max. hydraulic power – 6.8 kW
3 point hitch – Category – 2
Control – Automatic depth and draft control (ADDC)
Hydraulics Capacity – Common to transmission
Max. drawbar pull without ballast – 14.4 kN
Max. drawbar power – 22.48 kW
Wheels and Tires
Front Tire – 6.0 x 16,8 PR / 8.0 x 18,6 PR
Rear Tire – 13.6 x 28,12 PR / 14.9 x 28,12 PR
John Deere 5050D Dimensions
Total Weight (2WD) – 1830 kg
Total Weight (MFWD) – 1975 kg
Wheel Base – 1950 mm
Overall Length (2WD) – 3370 mm
Overall Length (MFWD) – 3350 mm
Overall Width (2WD) – 1805 mm
Overall Width (MFWD) – 1775 mm
Overall Height (with Exhaust Pipe) – 2200 mm
Ground Clearance (2WD) – 440 mm
Ground Clearance (MFWD) – 365 mm
Turning Radius with Brake – 2.9 m
Turning Radius without Brake – 3.2 m