JD 4310 Engine Specifications
Engine Model – Yanmar 3TNE84
Type – Diesel
Cylinders – 3
Gross Horsepower – 23.2 kW (31.2 hp)
PTO Horsepower (SyncShift and ePowrReverser) – 20.1 kW (27.0 hp)
PTO Horsepower (eHydro Transmission) – 19.0 kW (25.5 hp)
Rated Engine Speed – 2600 rpm
Operating Range – 1000-2810 rpm
Engine Torque Rated Speed – 78.5 Nm (57.9 lb-ft)
Compression Ratio – 18.5:1
Lubrication – Pressurized
Cooling System – Water Pump
Oil Filter – Single Element
Air Cleaner – Dry Type with Safety Element
Starting Aid – Air Heater
Electrical System Type – 12 Volt
Battery Size – 500 Cold Cranking Amps at -18 C (0 F)
Alternator – 40 Amp
High Capacity Alternator – 55 Amp
Starter Size – 1.4 kW (1.9 hp)
Fuel Filter – Replaceable Element
Fuel – Diesel
Fuel Pump – In-Line with Electric Shutoff
Fuel Delivery – Direct Injection, Self Bleeding
Fuel Tank Capacity – 37.9 L (10.0 gal)
Cooling System Capacity – 5.7 L (6.0 qt)
Crankcase with Filter Capacity – 4.3 L (4.5 qt)
John Deere 4310 Power Take-Off
PTO Type – Independent
Clutch Type – Wet Disk
Brake Type – Wet Disk
Speed (Mid-PTO rpm Rated Engine Speed) – 2100 rpm
Speed (Rear PTO rpm Rated Engine Speed) – 540 rpm
JD 4310 Drive Train
Basic Transmission – 9×3 SyncShift (2WD and 4WD)
Optional Transmission – 12×12 ePowrReverser (4WD Only) / eHydro (2WD and
4WD)
Number Of Speeds (SyncShift Transmission) – 9 Forward, 3 Reverse
Number Of Speeds (ePowrReverser Transmission) – 12 Forward, 12 Reverse
Number Of Speeds (eHydro Transmission) – Infinite Forward, Infinite
Reverse
Mechanical Front Wheel Drive Standard – ePowrReverser
Mechanical Front Wheel Drive Optional – eHydro
Capability for MFWD – All Ranges
Rear Final Drive Type – Spur Gear
Differential Lock – Mechanical
Brakes Type – Wet Disk
Main Clutch Disk Type (SyncShift Transmission) – One Mult-Disk Wet
Clutch
Main Clutch Disk Type (ePowrReverser Transmission) – Two Mult-Disk Wet
Clutches
Main Clutch Disk Diameter (SyncShift Transmission) – 12,4 cm (4.88 in.)
Main Clutch Disk Diameter (ePowrReverser Transmission) – 12,6 cm (4.96
in.)
Front Axle Operating Capacity – 720-1450 kg (1588-3197 lb)
Rear Axle Operating Capacity – 2000 kg (4410 lb)
Drawbar Maximum Vertical Load – 255 kg (562 lb)
Transmission and Hydraulic System (Gear Models) Capacity – 24 L (6.3
gal)
Transmission and Hydraulic System (eHydro Model) Capacity – 26 L (6.8
gal)
Front Axle (MFWD Models) Capacity – 4.5 L (4.7 qt)
John Deere 4310 Hydraulic and Hitch
Type of Hydraulic System – Open Center
Power Steering – Standard
Implement and Steering Pump Type – Gear Pump
Working Pressure – 17238 kPa (2500 psi)
Pump Capacity (Main) Rated Speed – 32.5 L/min (8.6 gpm)
Pump Capacity (Power Steering) Rated Speed – 20.1 L/min (5.3 gpm)
Total Flow of Pumps Rated Speed – 52.5 L/min (13.9 gpm)
3-Point Hitch Type – Category 1
Lift Capacity-61 cm (24 in.) Behind Link Arms – 999 kg (2200 lb)
JD 4310 Wheels and Tires
Front
7.00-14 4PR R3 BS
25-10.50LLx15 6PR
7.00-16 6PR R1 (MFWD)
25×8.50-14 6PR R4
27×8.50-15 4PR R3 (2WD)
27×8.50-15 6PR R4
Rear
11.2-24 4PR R3 BS
11.2-24 4PR R1
41×14.00-20 4PR R3
43×16.00-20 6PR R4
John Deere 4310 Dimensions
Wheelbase – 1,7 m (68.0 in.)
Overall Length with 3-Point Hitch – 3 m (117 in.)
Overall Width (Minimum) – 1,3 m (50.0in.)
Overall Width (Maximum) – 1,7 m (66.7 in.)
Inside Width (Minimum) – 67 cm (26.5 in.)
Inside Width (Maximum) – 1 m (40.1 in.)
Height From Ground To Top of Hood – 1,4 m (53.3 in.)
Height From Ground To Top of Standard ROPS – 2,1 m (82.4 in.)
Height From Ground To Top of Folding ROPS – 2,3 m (90.0 in.)
Ground Clearance, Rear Axle – 34 cm (13.4 in.)
Weight (2WD) – 1179 kg (2600 lb)
Weight (MFWD) – 1315 kg (2900 lb)