JD 4210 Engine Specifications
Engine Model – Yanmar 3TNE82A
Type – Diesel
Cylinders – 3
Gross Horsepower – 20.2 kW (27.0 hp)
PTO Horsepower (SyncShift Transmission) – 17.5 kW (23.5 hp)
PTO Horsepower (eHydro Transmission) – 16.4 kW (22.0 hp)
Rated Engine Speed – 2600 rpm
Operating Range – 1000-2810 rpm
Engine Torque Rated Speed – 71.0 Nm (52.4 lb-ft)
Compression Ratio – 18.5:1
Lubrication – Pressurized
Cooling System – Water Pump
Oil Filter – Single Element
Air Cleaner – Dry Type with Safety Element
Starting Aid – Air Heater
Electrical System Type – 12 Volt
Battery Size – 500 Cold Cranking Amps at -18C (0F)
Alternator – 40 Amp
High Capacity Alternator – 55 Amp
Starter Size – 1.2 kW (1.6 hp)
Fuel Filter – Replaceable Element
Fuel – Diesel
Fuel Pump – In-Line with Electric Shutoff
Fuel Delivery – Direct Injection, Self Bleeding
John Deere 4210 Power Take-Off
PTO Type – Independent
Clutch Type – Wet Disk
Brake Type – Wet Disk
Speed (Mid-PTO rpm Rated Engine Speed) – 2100 rpm
Speed (Rear PTO rpm Rated Engine Speed) – 540 rpm
JD 4210 Drive Train
Transmission Type – 9×3 SyncShift (2WD and 4WD)
Transmission Type – eHydro (2WD and 4WD)
Number Of Speeds (SyncShift Transmission) – 9 Forward, 3 Reverse
Number Of Speeds (eHydro Transmission) – Infinite Forward, Infinite
Reverse
Mechanical Front Wheel Drive Standard – ePowrReverser
Mechanical Front Wheel Drive Optional – eHydro
Capability for MFWD – All Ranges
Rear Final Drive Type – Spur Gear
Differential Lock – Mechanical
Brakes Type – Wet Disk
Main Clutch Disk Type (SyncShift Transmission) – One Mult-Disk Wet
Clutch
Main Clutch Disk Diameter (SyncShift Transmission) – 12,4 cm (4.88 in.)
Main Clutch Disk Diameter (ePowrReverser Transmission) – 12,6 cm (4.96
in.)
Front Axle Operating Capacity – 720-1275 kg (1588-2811 lb)
Rear Axle Operating Capacity – 2000 kg (4410 lb)
Drawbar Maximum Vertical Load – 255 kg (562 lb)
John Deere 4210 Hydraulic and Hitch
Type of Hydraulic System – Open Center
Power Steering – Standard
Implement and Steering Pump Type – Gear Pump
Working Pressure – 14652 kPa (2125 psi)
Pump Capacity (Main) Rated Speed – 26.5 L/min (7.0 gpm)
Pump Capacity (Power Steering) Rated Speed – 20.1 L/min (5.3 gpm)
Total Flow of Pumps Rated Speed – 46.5 L/min (12.3 gpm)
3-Point Hitch Type – Category 1
Lift Capacity-61 cm (24 in.) Behind Link Arms – 771 kg (1700 lb)
Capacities
Fuel Tank – 37.9 L (10.0 gal)
Cooling System – 5.3 L (5.6 qt)
Crankcase with Filter – 3.8 L (4.0 qt)
Transmission and Hydraulic System (Gear Models) – 24 L (6.3 gal)
Transmission and Hydraulic System (eHydro Model) – 26 L (6.8 gal)
Front Axle (MFWD Models) – 4.5 L (4.7 qt)
JD 4210 Wheels and Tires
Front
7.00-14 4PR R3 BS
25-10.50LLx15 6PR
23×8.50-12 4PR R4 (MFWD)
24×8.50-14 4PR R3 (MFWD)
24×8.50-14 4PR R3 (2WD)
4.00-15 4PR F2
Rear
41LLx18.00-16.1 6PR
11.2-24 4PR R3 BS
11.2-24 4PR R1
12.4-16 6PR R1
13.6-16 4PR R3I
14.00-17.5 6PR R4
John Deere 4210 Dimensions
Wheelbase – 1,7 m (65.0 in.)
Overall Length with 3-Point Hitch – 3 m (117 in.)
Overall Width (Minimum) – 1,3 m (53 in.)
Overall Width (Maximum) – 1,5 m (58.4 in.)
Inside Width (Minimum) – 69 cm (27.1 in.)
Inside Width (Maximum) – 73 cm (28.5 in.)
Height From Ground To Top of Hood – 1,2 m (50.4 in.)
Height From Ground To Top of Standard ROPS – 2 m (79.5 in.)
Height From Ground To Top of Folding ROPS – 2,2 m (87.1 in.)
Ground Clearance, Rear Axle – 27 cm (10.5 in.)
Weight (2WD) – 1077 kg (2375 lb)
Weight (MFWD) – 1213 kg (2675 lb)