JD 4055 Engine Specifications
Engine Model – John Deere 6466T
Engine Type – 4 stroke six-cylinder turbocharged diesel
Number of Cylinders – 6 Inline
Displacement, cu in (L) – 466 (7,6)
Engine Bore, in (mm) – 4,56 (116,0)
Engine Stroke, in (mm) – 4,75 (121,0)
Aspiration – Turbocharged
Rated Engine Power, hp (kW) – 127,9 (95,4)
Rated Engine Speed, rpm – 2200
Maximum Torque, Nm (ft-lbs) – 550 (407)
Torque Speed, rpm – 1210
Idle Speed, rpm – 800-2400
Compression – 16:1
Firing Order – 1-5-3-6-2-4
Fuel System – Direct injection
Fuel Tank Capacity, gal (L) – 65,0 (246,0)
Oil Capacity, qts (L) – 19,0 (18,0)
Coolant Capacity, qts (L) – 27,0 (25,6)
Intake Valve Clearance, in (mm) – 0,02 (0,508)
Exhaust Valve Clearance, in (mm) – 0,02 (0,508)
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120
John Deere 4055 Power Take-Off
PTO Operational Type – Independent
PTO Clutch – Hydraulic
PTO Horsepower, hp (kW) – 114,0 (85,0)
PTO Speeds, rpm – 540/1000
Transmission Configuration
Transmission Model – 16F/6R Quad Range
Transmission Type – Partial power shift
Number of Forward Speeds – 16
Number of Reverse Speeds – 6
Clutch – Hydraulic wet disc
Maximum Speed Forward, mph (kph) – 18,3 (29,4)
Oil Capacity (2WD), qts (L) – 64,0 (60,6)
Oil Capacity (4WD), qts (L) – 68,8 (65,1)
JD 4055 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front steer
Steering System – Power Steering
Front Tire Size (2WD) – 10.00-16
Front Tire Size (4WD) – 14.9-26
Rear Tire Size – 18.4-38
Axles and Brakes
Final Drive – Inboard planetary
Service Brake – Differential hydraulic wet disc
John Deere 4055 Hydraulic System and Hitch
Hydraulic System Type – Closed center
Implement Pump Flow, gpm (Lpm) – 26,5 (100,3)
CSV Flow, gpm (Lpm) – 20,6 (78,0)
Hydraulic Pressure, Bar (psi) – 174,4 (2530)
Hydraulic Capacity (2WD), gal (L) – 16,0 (60,6)
Hydraulic Capacity (4WD), gal (L) – 17,2 (65,1)
Number of Standard Remote Valves – 2 or 3
3-Point Hitch Category – 2
Standard Lift Capacity at lift pin, lb (kg) – 5504 (2496)
Optional Lift Capacity at lift pin, lb (kg) – 7280 (3300)
JD 4055 Dimensions and Weight
Wheelbase (2WD), in (mm) – 106,7 (2710)
Wheelbase (4WD), in (mm) – 105,3 (2670)
Length, in (mm) – 158,6 (4020)
Height (Steering Wheel), in (mm) – 92,8 (2350)
Height (Cabin), in (mm) – 116,5 (2950)
Overall Width, in (mm) – 96,0 (2430)
Turning Radius, in (mm) – 193,0 (4900)
Weight (2WD), lb (kg) – 12130 (5500)
Weight (4WD), lb (kg) – 13950 (6330)
John Deere 4055 Loader Attachment
Loader Model – John Deere 265
Weight, lb (kg) – 2619 (1187)
Height (to pin), in (mm) – 157 (3980)
Clearance, dumped bucket, in (mm) – 123 (3120)
Dump reach, in (mm) – 25.6 (650)
Clearance, level bucket, in (mm) – 150 (3810)
Rollback angle, deg – 43
Breakout force (lift), lb (kg) – 5730 (2599)
Lift to full height (at pin), lb (kg) – 3920 (1778)
Bucket width, in (mm) – 61 (1540) / 73 (1850)