John Deere 322 Engine Specs
Engine Model – Yanmar 3TG66UJ
Engine Type – Gasoline 4-stroke 3-cylinder liquid cooled
Number of Cylinders – Three
Displacement, cu in (L) – 40,2 (0,658)
Engine Bore, in (mm) – 2,60 (66,0)
Engine Stroke, in (mm) – 2,53 (64,0)
Rated Engine Power, hp (kW) – 18,0 (13,4)
Idle Speed, rpm – 1300-3425
Compression – 8.7:1
Fuel System – Carburetor
Valve Clearance, in (mm) – 0,008 (0,2)
Alternator Belt Deflection, in (mm) – 0,5 (13,0)
Fuel Tank Capacity, gal (L) – 4,5 (17,0)
Oil Capacity, qts (L) – 2,9 (2,7)
Coolant Capacity, qts (L) – 2,9 (2,7)
Electrical System Rating, Volts – 12
Charging System – Alternator
Alternator Rating, Amps – 20
JD 322 Power Take-Off
Rear PTO Operational Type – Independent
Rear PTO Speeds, rpm – 2000
Clutch – Electric
Front PTO Operational Type – Independent
Front PTO Speeds, rpm – 3425
John Deere 322 Transmission
Transmission Model – Sundstrand 15 Transaxle
Transmission Type – Shaft-driven hydrostatic
Speeds – Infinite forward and reverse
Max Forward Speed, mph (kph) – 7,3 (11,7)
Max Reverse Speed, mph (kph) – 3,7 (6,0)
Transmission Oil Capacity, qts (L) – 13,0 (12,3)
Brakes – Mechanical drum
JD 322 Wheels and Tires
Drive Wheels – 2WD
Steering Configuration – Front steer
Steering System – Power Steering
Front Tire Size – 16×6.50-8
Rear Tire Size – 23×10.50-12
John Deere 322 Hydraulics and Hitch
Hydraulic System Capacity, qts (L) – 1,63 (6,2)
Number of Standard Remote Valves – 2
3-Point Hitch Category – 0
Draft Sensing or Lift Control – Non-position control
JD 322 Dimensions and Weight
Wheelbase, in (mm) – 46 (1160)
Length, in (mm) – 69,5 (1760)
Height, in (mm) – 44,5 (1130)
Overall Width, in (mm) – 43,3 (1090)
Front Tread, in (mm) – 32 (810)
Rear Tread, in (mm) – 30,5-32,8 (770-830)
Weight, lb (kg) – 900 (410)
John Deere 322 Attachments
Front End Loader
Loader Model – John Deere 44
Height (to pin), in (mm) – 71,5 (1810)
Clearance, dumped bucket, in (mm) – 21 (530)
Dump angle, degrees – 50
Reach at ground, in (mm) – 44 (1110)
Rollback angle, degrees – 20
Breakout force (bucket), lb (kg) – 575 (260)
Lift to full height (at pin), lb (kg) – 400 (181)
Bucket width, in (mm) – 48 (1210) / 54 (1370)
48″ Bucket capacity, yd3 (m3) – 0,21 (0,2)
54″ Bucket capacity, yd3 (m3) – 0,24 (0,21)
Loader weight, lb (kg) – 500 (226)
38 Inch Mower Deck
Mower Deck Type – Mid-mount
Number of Blades – 2
Cutting width, in (mm) – 38 (960)
Overall width, in (mm) – 49,7 (1560)
Cutting height, in (mm) – 1,0-4,0 inch (20-100)
Lifting – Hydraulic
Weight, lb (kg) – 100 (45)
46 Inch Mower Deck
Mower Deck Type – Mid-mount
Number of Blades – 3
Cutting width, in (mm) – 46 (1160)
Overall width, in (mm) – 57 (1440)
Cutting height, in (mm) – 1,5-5,0 inch (30-120)
Lifting – Hydraulic
Weight, lb (kg) – 116 (52)
50 Inch Mower Deck
Mower Deck Type – Mid-mount
Number of Blades – 3
Cutting width, in (mm) – 50 (1270)
Overall width, in (mm) – 68 (1720)
Cutting height, in (mm) – 1,5-4,0 inch (30-100)
Lifting – Hydraulic
Weight, lb (kg) – 186 (84)
47 Inch Snow blower
Snowblower Model – JD 2752M
Type – Two-stage, Front-mount
Clearing width, in (mm) – 47 (1190)
Clearing height, in (mm) – 23 (580)
Lift – Hydraulic
Weight, lb (kg) – 400 (181)
Front Blade
Blade Model – JD 0611M
Blade Type – Front-mount
Width, in (mm) – 54,0 (1370)
Height, in (mm) – 18,0 (450)
Lift height, in (mm) – 12,0 (300)
Cut depth, in (mm) – 3,5 (80)
Lift – Hydraulic
Angle – Manual/Hydraulic