JD 2210 Engine Specifications
Manufacturer – Yanmar
Model Number – 3TNE74
Type – Diesel
Gross Horsepower 17.1 kW (23.0 hp)
PTO Horsepower 13.2 kW (17.7 hp)
Cylinders – Three
Bore/Stroke – 2.91×3.07 inches (74 x 78 mm)
Rated Engine Speed – 3000 rpm
Speed, Fast Idle – 3250
Speed, Slow Idle – 1400
Operating Range – 1400 – 3250 rpm
Cooling Type – Liquid
Oil Filter – Standard Single Element
Air Cleaner – Dry Type w/ Safety Element
Fuel System Type – Indirect Fuel Injection
Fuel – Diesel
Fuel Filter – Replaceable Element
Fuel Pump – In-line with Solenoid Shutoff
Electrical System Type – 12 Volt
Battery Size 435 Cold Cranking Amps -18°C (0°F)
Alternator – 20 amp
John Deere 2210 Drivetrain
Transmission Type – 2 Range Hydrostatic
Number of Speeds – Infinite
Mechanical Front Wheel Drive (MFWD) – Standard
MFWD Capability – All Ranges
MFWD Engagement – On The Go
Final Drive – Spur Gear
Rear Axle Maximum Load – 1415 kg (3120 lb)
Front Axle Maximum Load – 1415 kg (3120 lb)
Forward Speed-Range High – 0-13.3 km/h (0-8.4 mph)
Forward Speed-Range Low – 0-6.6 km/h (0-4.3 mph)
Reverse Speed-Range High – 0-10.6 km/h (0-6.3 mph)
Reverse Speed-Range Low – 0-5.3 km/h (0-3.2 mph)
JD 2210 PTO
Type – Independent
Clutch Type – Wet Disk
Mid PTO Brake – Shoe Type
Speed-Mid PTO rpm / 2900 engine RPM – 2100 rpm
Speed-Rear PTO rpm / 2900 engine RPM – 540 rpm
Mechanical
Chassis – 4×4 MFWD 4WD
Final drives – spur gear
Differential lock – mechanical rear
Steering – Power
Brakes – Wet Disk
Cab – Two-post fixed ROPS
John Deere 2210 Hydraulic System
Type – open center
Capacity – 3.4 gal (12.9 L)
Pressure – 1987 psi (137.0 bar)
Mid valves – 2
Pump flow – 3 gpm (11.4 lpm)
Total flow – 5.5 gpm (20.8 lpm)
Steering flow – 2.5 gpm (9.5 lpm)
3-Point Hitch
Type – Category 1
Hitch Plate Maximum Vertical Load – 255 kg (562 lb)
Lift Capacity-61 cm (24 in.) behind link arms – 318 kg (701 lb)
Total Lift Height – 248 mm (9.76 in.)
JD 2210 Wheels and Tires
Front Standard – 18×8.5-10 R1
Front Optional – 18×8.5-10 R3
Rear Standard – 26×12.00-12 R1
Rear Optional – 26×12.00-12 R3
Front Tire Inflation Pressures (Maximum) – 18×8.5-10 R1 – 152 kPa (22
psi) / 18×8.5-10 R3 – 152 kPa (22 psi)
Rear Tire Inflation Pressures (Maximum) – 26×12.00-12 R1 – 83 kPa (12
psi) / 26×12.00-12 R3 – 83 kPa (12 psi)
Capacities
Fuel Tank – 19 L (5.0 gal)
Cooling System – 3.0 L (3.2 qt)
Crankcase with Filter – 2.1 L (2.2 qt)
Transmission and Hydraulic System – 13.0 L (3.4 gal)
Front Axle – 2.5 L (2.6 qt)
John Deere 2210 Dimensions
Wheelbase – 1450 mm (57.1 in.)
Overall Length with 3-point Hitch – 2650 mm (104.3 in.)
Overall Width – 1200 mm (47.2 in.)
Tread Width Centerline (Minimum) – Front 905 mm (35.6 in.) / Rear 896 mm
(35.3 in.)
Height From Ground To Top of Hood (R1 Tires) – 1061 mm (41.8 in.)
Height From Ground To Top of Hood (R3 Tires) – 1054 mm (41.5 in.)
Height From Ground To Top of ROPS – 1970 mm (77.6 in.)
Ground Clearance Front Axle – 195 mm (7.7 in.)
Turning Radius MFWD Off – 2300 mm (88.6 in.)
Weight Machine equipped with a ROPS, 3-point hitch, standard R1 tires
and all fluids – 635 kg (1400 lb)
Attachments
62-inch Mower deck
Type – mid-mount 3-blade
Cutting width – 62 inches (157 cm)
Belt – shaft-driven
Blade
Type – front-mount John Deere
Width – 54 inches (137 cm)
Lift height – 11 inches (27 cm)
Cut depth – 3.5 inches (8 cm)
Weight – 50 lbs (22 kg)
46-inch Snow blower
Type – front-mount single-stage
Clearing width – 46 inches (116 cm)
Clearing height – 12 inches (30 cm)
Weight – 250 lbs (113 kg)
Overall width – 47.5 inches (120 cm)
John Deere 210 Loader
Height (to pin) – 68.5 inches (173 cm)
Clearance, dumped bucket – 50 inches (127 cm)
Dump reach – 242 inches (614 cm)
Dump angle – 47.2
Reach at ground – 50.2 inches (127 cm)
Rollback at ground – 26.5
Rollback, raised – 98.2
Breakout force (at pin) – 1577 lbs (715 kg)
Breakout force (at 500mm) – 1072 lbs (486 kg)
Breakout force (bucket) – 1650 lbs (748 kg)
Lift to full height (at pin) – 622 lbs (282 kg)
Lift to full height (at 500mm) – 437 lbs (198 kg)
Lift to 1.5m (at pin) – 721 lbs (327 kg)
Lift to 1.5m (at 500mm) – 520 lbs (235 kg)
Bucket width – 49.2 inches (124 cm)
Raise time to height – 3.8 s
Bucket dump time – 2.4 s
Lowering time – 2.0 s
Rollback time – 3.4 s