JD 2038R Engine Specifications
Engine Model – Yanmar 3TNV86CT-NJT2
Engine Type – Diesel
Gross Horsepower – 27.4 kW (36.8 hp)
Manufacturer’s Estimated PTO Horsepower – 22.7 kW (30.4 hp)
Low Idle Speed – 950 rpm
Rated Engine Speed – 2500 rpm
High Idle – 2650 rpm
Operating Range – 950-2650 rpm
Engine Torque @ Rated Speed – 105 Nm (77.4 lb-ft)
Maximum Torque @ 1625 rpm – 127 Nm (93.7 lb-ft)
Displacement – 1.57 L
Cylinders – 3
Cooling System – Liquid
Oil Filter – Single Element
Air Cleaner – Dual Element
Starting Aid – Glow Plug
Battery Voltage – 12V
Battery Cold Cranking Amps @ -18C (0F) – 500
Alternator Capacity – 85 Amp
John Deere 2038R Power Take-off
Rear PTO – Independent
Clutch – Wet disc
Rear RPM – 540 (1.375)
Mid PTO – Independent
Mid RPM – 2100
Front PTO (Opt.) – Independent
Front RPM – 2100
PTO Power – 30 hp (22.4 kW)
John Deere 2038R Drivetrain
Transmission Type – Hydrostatic
Speeds – Infinite / Two-speed ranges
Mechanical Front Wheel Drive – Standard
Engage MFWD – four-wheel braking
Final Drive – Spur Gear
Rear Axle Weight Capacity (Continuous) – 1800 kg (3968 lb)
Front Axle Weight Capacity (Continuous) – 880 kg (1764 lb)
Forward and Reverse Speed (Low Range) – 0-9.2 km/h (0-5.7 mph)
Forward and Reverse Speed (High Range) – 0-24.7 km/h (0-15.4 mph)
Differential lock – Mechanical Rear
Steering – Power Steering
Steering Wheel – Tilt Control
Brakes – Wet disc
John Deere 2038R Hydraulics and Hitch
Hydraulic System Type – Open center
Pump Type – Tandem Gear
Hydrostatic Pump Type – PV Axial Piston
System Relief Pressure – 17237 kPa (2500 psi)
Implement Pump Flow @ Rated Speed – 20.2 L/min (5.3 gpm)
Power Steering Pump Flow @ Rated Speed – 15 L/min (4 gpm)
Total Pump Flow – 35.2 L/min (9.3 gpm)
hydraulic Control – SCV
3-Point Hitch Type – Category 1
3-Point Hitch Lift Capacity at ends behind hitch ball – 946 kg (2086 lb)
3-Point Hitch Lift Capacity 61 cm (24 in.) behind hitch ball – 675 kg
(1488 lb)
JD 2038R Tire Sizes
Front Tires – 23×8.50-14 6PR-R4
Front Tires – 23×8.50-14 6PR-R3
Front Tires – 200/60R15-R3
Front Tires – 7.00-12 6PR-R1
Rear Tires – 14-17.5 6PR-R4
Rear Tires – 14-17.5 6PR-R3
Rear Tires – 300/70R20-R3
Rear Tires – 12.4-16 6PR-R1
Capacities
Fuel Tank – 32 L (8.5 gal)
Cooling System (Open Operator Station) – 5.2 L (5.5 qt)
Cooling System (Cab) – 5.7 L (6.0 qt)
Crankcase with Filter – 4.3 L (4.5 qt)
Transmission and Hydraulic System – 23.5 L (24.8 qt)
Front Axle – 3.8 L (4 qt)
John Deere H130 Loader
Lift capacity at pivot pin (max. height), kg (lb) – 410 (902)
Maximum lift height at pivot pin, mm (in) – 1993 (78.5)
Reach at max. height, mm (in) – 750 (29.5)
Breakout force at pivot pin, kg (lb) – 1016 (2239)
Dump Angle, deg. – 38
Rollback Angle, deg. – 25
Loader Raising Time, sec. – 3.19
Loader Lowering Time, sec. – 1.95
Bucket Dump Time, sec. (regen) – 3.19
Bucket Rollback Time, sec. – 1.95
JD 2038R Dimensions
Wheelbase – 1723 mm (67.8 in.)
Overall Length from front bumper to 3-point hitch – 2990 mm (117.5 in.)
Overall Width – 1400 mm (55.1 in.)
Height from Ground to top of hood – 1280 mm (50.4 in.)
Height from Ground to top of ROPS – 2344 mm (92.3 in.)
Front Axle Ground Clearance – 248.5 mm (9.8 in.)
Turning Radius 2WD with brakes – 2.15 m (84.6 in.)
Turning Radius 2WD without brakes – 2.5 m (98.4 in.)
Base Tractor Weight – 1105 kg (2436 lb)
Maximum vertical load – 500 daN
Towable Mass (Unbraked) – 1500 kg
Towable Mass (Independently braked) – 2400 kg
Towable Mass (Inertia braked) – 2500 kg
Combination mass tractor plus trailer – 4900 kg