John Deere 2036R Engine Specifications
Engine Manufacturer – Yanmar
Engine Model – 3TNV84T-BXJT4
Type – Diesel
Engine Gross Horsepower – 27.7 kW (37.1 hp)
Engine Net Power – 26.8 kW (35.9 hp)
Manufacturer’s Estimated PTO Horsepower – 21.7 kW (29.1 hp)
Low Idle Speed – 950 rpm
Rated Engine Speed – 2600 rpm
High Idle – 2800 rpm
Operating Range – 950-2800 rpm
Engine Torque @ Rated Speed – 106 Nm (78 lb-ft)
Maximum Torque @ 1800 rpm – 120 Nm (88.5 lb-ft)
Displacement – 1.5 L
Cylinders – 3
Cooling System – Liquid
Oil Filter – Single Element
Air Cleaner – Dual Element
Starting Aid – Air Heater
Battery Voltage – 12V
Battery Cold Cranking Amps @ -18C (0F) – 500
Alternator Capacity – 75 Amp
JD 2036R Power Take-off
Rear PTO – Independent
Clutch – Wet disc
Rear RPM – 540 (1.375)
Mid PTO – Independent
Mid RPM – 2100
Front PTO (Opt.) – Independent
Front RPM – 2100
PTO Power – 30 hp (22.4 kW)
John Deere 2036R Drivetrain
Transmission Type – 2 Range Hydrostatic
Speeds – Infinite / 2 Range
Forward and Reverse Speed (Low Range) – 0-9.2 km/h (0-5.7 mph)
Forward and Reverse Speed (High Range) – 0-24.7 km/h (0-15.4 mph)
Mechanical Front Wheel Drive – Standard
Mechanical Front Wheel Drive Engagement – Stopped
Final Drive – Spur Gear
Differential lock – Mechanical Rear
Steering – Power Steering
Brakes – Wet disc
Rear Axle Capacity Weight – 1800 kg (3968 lb)
Front Axle Capacity Weight – 880 kg (1764 lb)
JD 2036R Hydraulic System and Hitch
Hydraulic System Type – Open center
Pump Type – Tandem Gear
Hydrostatic Pump Type – PV Axial Piston
System Relief Pressure – 17237 kPa (2500 psi)
Implement Pump Flow @ Rated Speed – 20.2 L/min (5.3 gpm)
Power Steering Pump Flow @ Rated Speed – 15 L/min (4 gpm)
Total Pump Flow – 35.2 L/min (9.3 gpm)
3-Point Hitch Type – Category 1
3-Point Hitch Lift Capacity at ends behind hitch ball – 946 kg (2086 lb)
3-Point Hitch Lift Capacity 61 cm (24 in.) behind hitch ball – 675 kg
(1488 lb)
John Deere 2036R Tire Sizes
Front Tires (Standard) – 7.00-12
Rear Tires (Standard) – 12.4-16
Front Tires (Turf) – 23×8.5-14
Rear Tires (Turf) – 14-17.5
Front Tires (Lawn/Turf) – 200/60R15
Rear Tires (Lawn/Turf) – 300/70R20
Front Tires (Industrial) – 23×8.5-14
Rear Tires (Industrial) – 14-17.5
Capacities
Fuel Tank – 32 L (8.5 gal)
Cooling System (Open Operator Station) – 5.2 L (5.5 qt)
Cooling System (Cab) – 5.7 L (6.0 qt)
Crankcase with Filter – 4.3 L (4.5 qt)
Transmission and Hydraulic System – 23.5 L (24.8 qt)
Front Axle – 3.8 L (4 qt)
JD 2036R Dimensions
Wheelbase – 1723 mm (67.8 in.)
Overall Length from front bumper to 3-point hitch – 2990 mm (117.5 in.)
Overall Width – 1367.6 mm (53.8 in.)
Height from Ground to top of hood – 1280 mm (50.4 in.)
Height from Ground to top of ROPS – 2344 mm (92.3 in.)
Front Axle Ground Clearance – 248.5 mm (9.8 in.)
Turning Radius 2WD with brakes – 2.15 m (84.6 in.)
Turning Radius 2WD without brakes – 2.5 m (98.4 in.)
Base Tractor Weight – 1105 kg (2436 lb)
Maximum Permissible Weight per Front Axle – 800 kg (1764 lb)
Maximum Permissible Weight per Rear Axle – 1800 kg (3969 lb)
Maximum Vertical Load (Drawbar) – 500 kg
Maximum Vertical Load (Wagon Hitch) – 400 kg