John Deere 100F Engine Specifications
Engine Model – VM D754 LTE
Engine Power, Rated, hp (kW) – 95.6 (70)
Engine Speed, rpm – 2600
Power Boost, hp (kW) – No boost
Fuel Tank, gal (L) – 16 (60)
Cylinders – 4
Displacement, cu in (L) – 181 (2.97)
Engine Bore, in (mm) – 3.70 (94)
Engine Stroke, in (mm) – 4.21 (107)
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged
Fuel System Control – Mechanical
Exhaust Pipe – Horizontal
Tractor Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 100
JD 100F Tractor Transmission
Description – Dual Power + Reverser Shuttle
Transmission Type – Gear
Forward / Reverse Speeds – 8F+ 8R mode and 16F+ 8R mode
Maximum Speed Forward, mph (kph) – 21.53 (34.65)
Creeper Range – Yes
Shuttle (Forward-Reverse) – Yes
John Deere 100F Power take off
PTO Horsepower, hp (kW) – 83 (61)
PTO Speeds, rpm – 540
PTO operational Type – Independent
Wheels and Tires
Drive Wheels – 4WD
Tractor Steering Configuration – Front Steer
Wheelbase, 4WD, in (mm) – 77 (1956)
Front Tire Size, 4WD – 260 / 70 R16
Rear Tire Size – 360 / 70 R24
JD 100F Orchard Axles and Brakes
Final Drive – Planetary / Inboard
Axle Output End – Flange
Axle Bar Diameter, in (mm) – No bar axle
Tractor Brake Type – Wet Disk
John Deere 100F Hydraulic System
Hydraulic System Type – Open center
Main Hydraulic Pump Type – Gear
Standard Pump Flow, gpm (Lpm) – 10 (35)
Standard Remote Valves – 2
JD 100F Tractor Hitch
3-Point Hitch Category – Category 1
Optional Hitch Category – Category 1N / 2
Draft Sensing or Lift Control – Mechanical Top Link
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 3,234 (1470)
Standard Lift Capacity at lift pin, lb (kg) – 5,511 (2500)
Drawbar Description – Swinging
Dimensions and Weight
Weight (shipping) – 5,556 lbs (2520 kg) (ROPS)
Wheelbase – 77 inches (195 cm)
Width – 57 inches (144 cm)
Ground clearance – 12.7 inches (32 cm) (front axle)
4WD turn radius – 9.5 feet (2.9 m) (with brakes)