Ford 1200 Engine Specifications
Engine Model ……………………. Shibaura LEK802D
Engine Type ……………………. 2-cylinder, liquid cooled diesel
Number of Cylinders ……………………. 2
Displacement, cu in (L) ……………………. 49.1 (0.804)
Engine Bore, in (mm) ……………………. 3.15 (80.0)
Engine Stroke, in (mm) ……………………. 3.15 (80.0)
Aspiration ……………………. Natural
Maximum Engine Power, hp (kW) ……………………. 16.0 (11.9)
Rated Engine Power, hp (kW) ……………………. 15.3 (11.4)
Rated Engine Speed, rpm ……………………. 2700
Low Idle Speed, rpm ……………………. 750-850
High Idle Speed, rpm ……………………. 2900
Compression ……………………. 23:1
Firing Order ……………………. 2-1
Air Cleaner ……………………. Dry type
Pre-Heating ……………………. Glow plugs
Valve Clearance, in (mm) ……………………. 0.012 (0.30)
Valve Seat Angle, degrees ……………………. 45
Injection Timing (Static BTDC), degrees ……………………. 23-24
Injection Opening Pressure, MPa (psi) ……………………. 118
(1705)
Fuel Tank Capacity, gal (L) ……………………. 3.5 (13.2)
Oil Capacity, qts (L) ……………………. 4.0 (4.2)
Coolant Capacity, qts (L) ……………………. 4.0 (4.2)
Electrical System Rating, Volts ……………………. 12
Charging System ……………………. Alternator
Alternator Rating, Amps ……………………. 20
Ford 1200 Power Take-Off
PTO Operational Type ……………………. Transmission
PTO Horsepower, hp (kW) ……………………. 13.5 (10.2)
Rear PTO Speed, rpm ……………………. 540
Front PTO ……………………. Optional
Transmission Configuration
Transmission Type ……………………. 10F/2R, Unsynchronized gears
with High/Low sliding gears
Number of Forward Gears ……………………. 10
Number of Reverse Gears ……………………. 2
Creeper ……………………. Optional
Gears with Creeper ……………………. 15F/3R
Clutch ……………………. Single Plate
Maximum Forward Speed, mph (kph) ……………………. 8.7 (13.9)
Maximum Reverse Speed, mph (kph) ……………………. 4.7 (7.6)
Oil Capacity, qts (L) ……………………. 20.0 (18.9)
Service Brake ……………………. Differential mechanical drum
Ford 1200 Wheels and Tires
Drive Wheels ……………………. 4WD 4×4
Steering Configuration ……………………. Front Steer
Steering System ……………………. Manual
Front Tire Size ……………………. 6.00-12
Rear Tire Size ……………………. 8.00-16
Front Tire Size (Turf) ……………………. 23×8.5-12
Rear Tire Size (Turf) ……………………. 8.00-16
Front Tread, in (mm) ……………………. 34.6 (870)
Rear Tread, in (mm) ……………………. 35.4-41.3 (890-1040)
Ford 1200 Hydraulics and Hitch
Hydraulic System Type ……………………. Open center
Implement Pump Flow, gpm (Lpm) ……………………. 4.1 (15.5)
Hydraulic Pressure, Bar (psi) ……………………. 127 (1850)
Hydraulic System Capacity, gal (L) ……………………. 5.0 (18.9)
3-Point Hitch Category ……………………. 1
Standard Lift Capacity at lift pin, lb (kg) …………………….
880 (400)
Ford 1200 Dimensions and Weight
Wheelbase, in (mm) ……………………. 48 (1210)
Length, in (mm) ……………………. 94.9 (2410)
Overall Width, in (mm) ……………………. 42.2 (1070)
Height (Exhaust), in (mm) ……………………. 70.5 (1790)
Height (ROPS), in (mm) ……………………. 79 (2000)
Ground Clearance, in (mm) ……………………. 9.7 (240)
Weight, lb (kg) ……………………. 1344 (608)
________________________________________________________________________________