Puma 215 Engine Specifications
Engine Make – Case IH FPT
Engine Model – 6.7 L
Number of Cylinders – 6
Displacement, cu in (L) – 411 (6.7)
Engine Bore, in (mm) – 4.095 (104)
Engine Stroke, in (mm) – 5.20 (132)
Advertised Engine Power, Rated, hp (kW) – 215 (158)
Maximum Engine Power, hp (kW) – 260 (191)
Rated Engine Speed, rpm – 2200
Power Boost, hp (kW) – 45 (33)
Fuel Tank capacity, gal (L) – 104 (395)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – 13.2 (50)
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged,
air-to-air aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4A (Interim)
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – SCR
w/ DEF
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – BorgWarner Visctronic
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 150 Std / 200 Opt
Case IH Puma 215 Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 180 (134)
PTO Speeds, rpm – 540 / 1000 / 1000E
PTO operational Type (Independent; Live; Continuous) – Independent
Basic Transmission
Manufacturer’s Description – 18 x 6 Full Powershift
Transmission Type – Full powershift
Number of Forward / Reverse Speeds – 18F / 6R
Maximum Speed Forward, mph (kph) – 25 (40)
Creeper Range Available – Yes
Shuttle (Forward-Reverse) Available – Yes
Optional Transmission
Manufacturer’s Description – 19F x 6R, 25 mph (40 kph)
Transmission Type – Full powershift
Number of Forward / Reverse Speeds – 19F / 6R
Manufacturer’s Description – 19F x 6R, 30 mph (50 kph)
Transmission Type – Full powershift
Number of Forward / Reverse Speeds – 19F / 6R
Puma 215 Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase, 2WD, in (mm) – No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 113.6 (2885)
Front Tire Size orTrack Width, MFD/4WD or Track – 16.9 R30, R1W
Rear Tire Size or Track Width – 20.8 R42 or 520/85 R42 R1W
Axles and Brakes
Final Drive Location and Description – Inboard Planetary
Axle Output End, Flange or Bar – Bar
Axle Bar Diameter, in (mm) – 4.125 (105)
Suspended Front Axle Available – Optional
Service Brake Type – Wet disc
Case IH Puma 215 Hydraulic System
Hydraulic System Type – Closed Center, Pressure Flow Compensated (PFC)
Main Hydraulic Pump Type – Variable Displacement
Implement Pump Flow, gpm (Lpm) – 32 (120)
Optional Pump Flow, gpm (Lpm) – 40 (150)
Number of Standard Remote Valves – 3 std; 4 or 5 opt.
3-Point Hitch
3-Point Hitch Category – Category 2 / 3N
Optional Hitch Category – No option
Draft Sensing or Lift Control – Electronic Draft Control (EDC)
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 10,200 (4627)
w/90 mm cyl.
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 15,200 (6895)
w/110 mm cyl.
Drawbar Description – Category 3, Swinging
Puma 215 Dimensions and Weight
Height to Top of ROPS raised, in (mm) – No open ROPS
Weight, MFD/4WD w/ROPS, lb (kg) – No open ROPS
Weight, 2WD w/Cab, lb (kg) – No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 15,900
(7212)
Weight, Total allowable, w/maximum ballast, lb (kg) – 28,660 (13000)
Case IH L770 Loader
Height (to pin) – 178 inches (452 cm)
Clearance, dumped bucket – 140 inches (355 cm)
Dump reach – 29 inches (73 cm)
Dump angle – 55
Reach at ground – 113 inches (287 cm)
Rollback angle – 43
Breakout force (at pin) – 6650 lbs (3016 kg)
Breakout force (at 800mm) – 5800 lbs (2630 kg)
Lift to full height (at pin) – 5450 lbs (2472 kg)
Lift to full height (at 800mm) – 4900 lbs (2222 kg)