Puma 195 Engine Specifications
Engine Model – Case IH FPT 6.7 L
Number of Cylinders – six
Displacement, cu in (L) – 411 (6.7)
Engine Bore, in (mm) – 4.095 (104)
Engine Stroke, in (mm) – 5.20 (132)
Advertised Engine Power, Rated, hp (kW) – 195 (147)
Maximum Engine Power, hp (kW) – 245 (180)
Rated Engine Speed, rpm – 2200
Power Boost, hp (kW) – 45 (33)
Fuel Tank capacity, gal (L) – 103 (390)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – 12.7 (48)
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged,
air-to-air aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – SCR
w/ DEF
Exhaust Gas Recirculation (EGR) – No
Cleanup Catalyst (CUC) – CUC standard
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – BorgWarner Visctronic std; Reversible
opt.
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 150 Std / 200 Opt
Case IH Puma 195 Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 170 (127)
PTO Speeds, rpm – 540 / 1000 FPS; 1000 / 1000E CVT
PTO operational Type (Independent; Live; Continuous) – Independent
Basic Transmission
Manufacturer’s Description – 18×6 Full Powershift
Transmission Type – Full powershift
Number of Forward / Reverse Speeds – 18F / 6R
Maximum Speed Forward, mph (kph) – 25 (40)
Creeper Range Available – Optional 29F x 12R
Shuttle (Forward-Reverse) Available – Yes
Optional Transmission
Manufacturer’s Description – 40 or 50 kph ECO CVT
Transmission Type – Continuously Variable (CVT)
Number of Forward / Reverse Speeds – Infinite, 4 ranges
Manufacturer’s Description – 19×6 Hi-Speed Gear, 30 mph (50kph)
Transmission Type – Full powershift
Number of Forward / Reverse Speeds – 19F / 6R
Puma 195 Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Front Tire Size orTrack Width, MFD/4WD or Track – 420/85 (16.9) R30
Rear Tire Size or Track Width – 520/85 (20.8) R42
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 113.6 (2885)
Axles and Brakes
Final Drive Location and Description – Planetary / Inboard
Axle Output End, Flange or Bar – Bar
Axle Bar Diameter, in (mm) – 4.13 (105)
Suspended Front Axle Available – Optional
Service Brake Type – Wet disc
Case IH Puma 195 Hydraulic System
Hydraulic System Type – Closed Center, Pressure Flow Compensated (PFC)
Main Hydraulic Pump Type – Variable Displacement
Implement Pump Flow, gpm (Lpm) – 31.7 (120) FPS; 39.6 (150) CVT
Optional Pump Flow, gpm (Lpm) – 39.6 (150) FPS; 44.9 (170) CVT
Number of Standard Remote Valves – 3 std; 4th & 5th opt.
3-Point Hitch
3-Point Hitch Category – Category 2
Optional Hitch Category – Category 2 / 3
Draft Sensing or Lift Control – Electronic Draft Control (EDC)
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 9,450 (4286)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 15,000 (6804)
w/110 mm cyl.
Drawbar Description – Swinging
Puma 195 Dimensions and Weight
Overall Width, with standard wheels or tracks, in (mm) – 112 (2845) bar
axle ends
Weight, 2WD w/Cab, lb (kg) – No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 15,900
(7212) FPS; 16,800 (7620) CVT
Weight, Total allowable, w/maximum ballast, lb (kg) – 28,660 (13000)
Case IH LX770 Loader
Height (to pin) – 178 inches (452 cm)
Clearance, dumped bucket – 140 inches (355 cm)
Dump reach – 29 inches (73 cm)
Dump angle – 55
Reach at ground – 113 inches (287 cm)
Rollback angle – 43
Breakout force (at pin) – 5800 lbs (2630 kg)
Lift to full height (at pin) – 5450 lbs (2472 kg)
Lift to full height (at 800mm) – 4900 lbs (2222 kg)