Puma 165 Engine Specifications
Engine Make – Case IH FPT
Engine Model – 6.7 L
Number of Cylinders – 6
Displacement, cu in (L) – 411 (6.7)
Engine Bore, in (mm) – 4.095 (104)
Engine Stroke, in (mm) – 5.20 (132)
Advertised Engine Power, Rated, hp (kW) – 165 (121)
Maximum Engine Power, hp (kW) – 210 (154)
Rated Engine Speed, rpm – 2200
Power Boost, hp (kW) – 45 (33)
Fuel Tank capacity, gal (L) – 71 (270) + 16 (60) auxiliary
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – 12.7 (48)
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged,
air-to-air aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – SCR
w/ DEF
Cleanup Catalyst (CUC) – CUC standard
Diesel Oxidation Catalyst (DOC) – DOC standard
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – BorgWarner Visctronic std; Reversible
opt.
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 150 Std / 200 Opt
Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 140 (104)
PTO Speeds, rpm – 540 / 1000 FPS; 1000 / 1000E CVT
PTO operational Type (Independent; Live; Continuous) – Independent
Case IH Puma 165 Transmission
Manufacturer’s Description – 18 x 6 Full Powershift
Transmission Type – Full powershift
Number of Forward / Reverse Speeds – 18F / 6R
Maximum Speed Forward, mph (kph) – 25 (40)
Creeper Range Available – Optional 29F x 12R
Shuttle (Forward-Reverse) Available – Yes
Manufacturer’s Description – 40 or 50 kph ECO CVT
Transmission Type – Continuously Variable (CVT)
Number of Forward / Reverse Speeds – Infinite, 2 ranges
Manufacturer’s Description – 19 x 6 Hi-Speed Gear, 30 mph (50kph)
Transmission Type – Full powershift
Number of Forward / Reverse Speeds – 19F / 6R
Puma 165 Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase, 2WD, in (mm) – No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 107.6 (2734) std; 109.8
(2789) Susp. Axle
Front Tire Size, 2WD – No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track – 380/85 (14.9) R30, R1W
Rear Tire Size or Track Width – 460/85 (18.4) R42, R1W
Axles and Brakes
Final Drive Location and Description – Planetary / Inboard
Axle Output End, Flange or Bar – Flange std; bar opt.
Axle Bar Diameter, in (mm) – 3.62 (92)
Suspended Front Axle Available – Optional
Service Brake Type – Wet disc
Case IH Puma 165 Hydraulic System
Hydraulic System Type – Closed Center, Pressure Flow Compensated (PFC)
Main Hydraulic Pump Type – Variable Displacement
Implement Pump Flow, gpm (Lpm) – 29.8 (113) FPS; 33 (125) CVT
Optional Pump Flow, gpm (Lpm) – 37 (140) CVT only
Number of Standard Remote Valves – 3 std; 4th & 5th opt.
3-Point Hitch
3-Point Hitch Category – Category 2
Optional Hitch Category – Category 2 / 3
Draft Sensing or Lift Control – Electronic Draft Control (EDC)
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 8,050 (3651)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 9,250 (4195)
Standard Lift Capacity at lift pin, lb (kg) – 12,185 (5527)
Drawbar Description – Swinging
Puma 165 Dimensions and Weight
Height to Top of Cab, in (mm) – 118.3 (3005)
Height to Top of ROPS raised, in (mm) – No open ROPS
Overall Width, with standard wheels or tracks, in (mm) – 98 or 112 (2489
or 2845) bar axle ends
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 13,900
(6305) FPS; 14,500 (6577) CVT
Weight, Total allowable, w/maximum ballast, lb (kg) – 24,251 (11000)