Case IH MXM 175 Engine Specs
Engine Model – CNH 675TA-HD
Engine Type – 4 stroke, turbocharged intercooled diesel
Number of Cylinders – 6
Displacement, cu in (L) – 456,5 (7,50)
Engine Bore, in (mm) – 4,4 (112,0)
Engine Stroke, in (mm) – 5,0 (127,0)
Rated Engine Power, hp (kW) – 174,0 (130,0)
Maximum Engine Power, hp (kW) – 210,0 (157,0)
Rated Engine Speed, rpm – 2000
Torque Speed, rpm – 1400
Maximum Torque, Nm (ft-lbs) – 790 (585)
Torque Rise – 40%
Aspiration – Turbocharged
Intercooled – Air to air cooled
Compression – 17.0:1
Fuel System – Mechanical fuel injection
Fuel Tank Capacity, gal (L) – 105,0 (398,0)
Oil Capacity, qts (L) – 20,0 (18,9)
Coolant Capacity, qts (L) – 27,6 (26,2)
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120
Case MXM175 Power Take-Off
PTO Operational Type – Independent
PTO Clutch – Electro-hydraulic
PTO Horsepower, hp (kW) – 145,0 (108,1)
PTO Speeds, rpm – 540/1000
Transmission Configuration
Transmission Type (Std) – 19F/6R, Full powershift
Number of Forward Speeds – 19
Number of Reverse Speeds – 6
Clutch – Wet disc
Maximum Forward Speed, mph (kph) – 28,4 (45,8)
Maximum Reverse Speed, mph (kph) – 6,5 (10,6)
Service Brake – Differential hydraulic wet disc
Case MXM 175 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 480/70 R30
Rear Tire Size – 580/70 R42
Case MXM175 Hydraulics and Hitch
Hydraulic System Type – Closed center load sensing
Implement Pump Flow, gpm (Lpm) – 31,7 (120,0)
Hydraulic Pressure, Bar (psi) – 190 (2750)
Hydraulic Capacity, gal (L) – 23,8 (90,0)
Number of Standard Remote Valves – 4/5
3-Point Hitch Category – 3/2
Draft Sensing or Lift Control – Electronic lower-link sensing
Standard Lift Capacity 24-in behind pin, lb (kg) – 17085 (7750)
Standard Lift Capacity at lift pin, lb (kg) – 19000 (8650)
Case IH MXM 175 Dimensions and Weight
Wheelbase (2WD), in (mm) – 111,8 (2830)
Wheelbase (4WD), in (mm) – 112,5 (2850)
Length (2WD), in (mm) – 184,2 (4670)
Length (4WD), in (mm) – 189,4 (4810)
Height, in (mm) – 118,9 (3020)
Turning Radius, in (mm) – 178 (4500)
Front Tread, in (mm) – 60-88 (1520-2230)
Rear Tread, in (mm) – 60-88 (1520-2230)
Weight, lb (kg) – 15795 (7165)