Case IH MXM 120 Engine Specifications
Engine Model – CNH 675TA-HD
Engine Type – 4 stroke, turbocharged intercooled diesel
Number of Cylinders – 6
Displacement, cu in (L) – 457,0 (7,49)
Engine Bore, in (mm) – 4,4 (112,0)
Engine Stroke, in (mm) – 5,0 (127,0)
Rated Engine Power, hp (kW) – 122,0 (91,0)
Rated Engine Speed, rpm – 2200
Torque Speed, rpm – 1400
Maximum Torque, Nm (ft-lbs) – 515 (381)
Torque Rise – 30%
Aspiration – Turbocharged
Intercooled – Air to air cooled
Compression – 17.0:1
Fuel System – Mechanical fuel injection
Fuel Tank Capacity, gal (L) – 75,0 (284,0)
Oil Capacity, qts (L) – 20,0 (18,9)
Coolant Capacity, qts (L) – 26,8 (25,4)
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120
Case MXM120 Power Take-Off
PTO Operational Type – Independent
PTO Clutch – Electro-hydraulic
PTO Horsepower, hp (kW) – 95,0 (70,8)
PTO Speeds, rpm – 540/1000
PTO / Engine Speeds, rpm – 540/1969, 1000/2120
Transmission Configuration
Transmission Type (Std) – 18F/6R, Partial powershift
Number of Forward Speeds – 18
Number of Reverse Speeds – 6
Clutch – Wet disc
Transmission Type (Opt) – 18F/6R, Full powershift
Number of Forward Speeds – 18
Number of Reverse Speeds – 6
Maximum Forward Speed, mph (kph) – 25,3 (40,7)
Maximum Reverse Speed, mph (kph) – 7,5 (12,2)
Service Brake – Differential hydraulic wet disc
Case MXM 120 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 14.9 R28
Rear Tire Size – 18.4 R38
Case MXM120 Hydraulics and Hitch
Hydraulic System Type – Closed center load sensing
Implement Pump Flow, gpm (Lpm) – 28,0 (106,0)
Hydraulic Pressure, Bar (psi) – 190 (2750)
Hydraulic Capacity, gal (L) – 23,8 (90,0)
Number of Standard Remote Valves – 2/5
3-Point Hitch Category – 2
Draft Sensing or Lift Control – Electronic lower-link sensing
Standard Lift Capacity 24-in behind pin, lb (kg) – 8725 (3960)
Case IH MXM 120 Dimensions and Weight
Wheelbase (2WD), in (mm) – 108,1 (2740)
Wheelbase (4WD), in (mm) – 107,2 (2720)
Length (2WD), in (mm) – 180,5 (4580)
Length (4WD), in (mm) – 185,7 (4710)
Height, in (mm) – 111,4 (2820)
Turning Radius, in (mm) – 155 (3900)
Front Tread, in (mm) – 60 to 76 (1520 to 1930)
Rear Tread, in (mm) – 60 to 88 (1520 to 2230)
Weight (2WD), lb (kg) – 11280 (5120)
Weight (4WD), lb (kg) – 11860 (5380)