Case IH MX90C Engine Specifications
Engine Model – Perkins 1004-4T
Engine Type – 4-stroke, direct injection, turbocharged diesel
Number of Cylinders – 4
Displacement, cu in (L) – 243,5 (4,0)
Engine Bore, in (mm) – 3,94 (100,0)
Engine Stroke, in (mm) – 5,00 (127,0)
Aspiration – Turbocharged
Rated Engine Power, hp (kW) – 90,0 (67,1)
Rated Engine Speed, rpm – 2200
Maximum Torque, Nm (ft-lbs) – 363 (268,6)
Torque Speed, rpm – 1400
Compression – 17.25:1
Firing Order – 1-3-4-2
Fuel System – Direct injection
Governor – Mechanical
Fuel Tank Capacity, gal (L) – 50,0 (190,0)
Oil Capacity, qts (L) – 9,3 (8,8)
Coolant Capacity, qts (L) – 16,6 (15,7)
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 95
Case MX 90 C Power Take-Off
PTO Operational Type – Independent
PTO Clutch – Electrically-actuated wet disc
PTO Horsepower, hp (kW) – 74,0 (55,2)
PTO Speeds, rpm – 540/1000
PTO / Engine Speeds, rpm – 540/1875, 1000/2210
Transmission Configuration
Transmission Type (Std) – 16F/12R, Partial powershift
Number of Forward Speeds – 16
Number of Reverse Speeds – 12
Clutch Type – Hydraulic wet discs
Transmission Type (Opt) – 32F/24R, Partial powershift with creeper
Number of Forward Speeds – 32
Number of Reverse Speeds – 24
Creeper – Standard
Maximum Forward Speed, mph (kph) – 23,0 (37,0)
Maximum Reverse Speed, mph (kph) – 13,7 (22,0)
Service Brake – Differential hydraulic wet disc
Case MX90C Wheels and Tires
Drive Wheels – 4WD 4×4
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 14.9-24
Rear Tire Size – 18.4-34
Case IH MX 90 C Hydraulics and Hitch
Hydraulic System Type – PFC (Closed center pressure flow compensated)
Implement Pump Flow, gpm (Lpm) – 25,0 (94,6)
Hydraulic Pressure, Bar (psi) – 203 (2950)
Hydraulic Capacity, gal (L) – 17,5 (66,2)
Number of Standard Remote Valves – 2/4
3-Point Hitch Category – 2
Draft Sensing or Lift Control – Electronic lower-link
Standard Lift Capacity 24-in behind pin, lb (kg) – 8390 (3810)
Standard Lift Capacity at lift pin, lb (kg) – 12910 (5870)
Case MX90C Dimensions and Weight
Wheelbase, in (mm) – 95,4 (2420)
Length, in (mm) – 170,6 (4330)
Height, in (mm) – 110,3 (2800)
Turning Radius, in (mm) – 169 (4300)
Weight (Shipping), lb (kg) – 10480 (4760)
Weight (Operating), lb (kg) – 11200 (5085)