Case IH MX-100 Engine Specs
Engine Model – Cummins B6T-590
Engine Type – 4-stroke, direct injection, turbocharged diesel
Number of Cylinders – 6
Displacement, cu in (L) – 359 (5,90)
Engine Bore, in (mm) – 4,02 (102,0)
Engine Stroke, in (mm) – 4,72 (120,0)
Aspiration – Turbocharged
Rated Engine Power, hp (kW) – 100,0 (74,6)
Rated Engine Speed, rpm – 2200
Maximum Torque, Nm (ft-lbs) – 460 (340,4)
Torque Speed, rpm – 1000
Compression – 17.5:1
Fuel System – Direct injection
Governor – Mechanical
Fuel Tank Capacity, gal (L) – 72,0 (273,0)
Oil Capacity, qts (L) – 15,8 (15,0)
Coolant Capacity, qts (L) – 19,5 (18,6)
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 65
Case MX100 Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 85,0 (63,4)
PTO Speeds, rpm – 540/1000
Transmission Configuration
Transmission Type (Std) – 16F/12R, Synchromesh
Number of Forward Speeds – 16
Number of Reverse Speeds – 12
Clutch Type – Wet disc
Transmission Type (Opt) – 20F/12R Partial powershift
Number of Forward Speeds – 20 (32 with creeper)
Number of Reverse Speeds – 12 (24 with creeper)
Creeper – Standard
Maximum Speed (Forward), mph (kph) – 24,8 (40,0)
Service Brake – Wet disc
Case MX-100 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 14.9-28
Rear Tire Size – 18.4-38
Case IH MX100 Hydraulics and Hitch
Hydraulic System Type – PFC (Closed center pressure flow compensated)
Implement Pump Flow, gpm (Lpm) – 25,0 (94,6)
Hydraulic Pressure, Bar (psi) – 203 (2950)
Hydraulic Capacity, gal (L) – 17,5 (66,2)
Number of Standard Remote Valves – 2/4
3-Point Hitch Category – 2/3N
Draft Sensing or Lift Control – Electronic lower-link
Standard Lift Capacity 24-in behind pin, lb (kg) – 8390 (3810)
Standard Lift Capacity at lift pin, lb (kg) – 12900 (5870)
Case MX-100 Dimensions and Weight
Wheelbase (2WD), in (mm) – 110,7 (2810)
Wheelbase (4WD), in (mm) – 106,3 (2700)
Length, in (mm) – 197,7 (5020)
Height, in (mm) – 114,7 (2910)
Ground Clearance (2WD), in (mm) – 23,8 (600)
Ground Clearance (4WD), in (mm) – 24,6 (620)
Front Tread, in (mm) – 60-88 (1520-2230)
Rear Tread, in (mm) – 60-88 (1520-2230)
Turning Radius, in (mm) – 183 (4650)
Weight (2WD), lb (kg) – 11300 (5130)
Weight (4WD), lb (kg) – 12460 (5650)