Maxxum 150 Engine Specifications
Advertised Engine Power, Rated, hp (kW) – 145 (107)
Maximum Engine Power, hp (kW) – 175 (129)
Rated Engine Speed, rpm – 2200
Power Boost, hp (kW) – 30 (22)
Fuel Tank capacity, gal (L) – 52.2 (198) std; 58.6 (222) opt.
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – 10.4 (39.5)
Engine Make – Case IH FPT
Engine Model – 6.7 L
Number of Cylinders – 6
Displacement, cu in (L) – 411 (6.7)
Engine Bore, in (mm) – 4.095 (104)
Engine Stroke, in (mm) – 5.20 (132)
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged w/
Air-to-Air Intercooler
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – SCR
w/ DEF
Exhaust Gas Recirculation (EGR) – No
Cleanup Catalyst (CUC) – CUC standard
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Viscous
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120 std; 150 or 200 opt
Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 125 (93)
PTO Speeds, rpm – 540 / 1000
PTO operational Type (Independent; Live; Continuous) – Independent
Case IH Maxxum 150 Transmission
Manufacturer’s Description – 16×16 Semi-Powershift
Transmission Type – Semi-Powershift
Number of Forward / Reverse Speeds – 16F / 16R
Maximum Speed Forward, mph (kph) – 25 (40)
Creeper Range Available – Optional
Shuttle (Forward-Reverse) Available – Standard
Manufacturer’s Description – 17×16 Semi-Powershift (25 mph)
Transmission Type – Semi Powershift
Number of Forward / Reverse Speeds – 17F /16R
Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase, 2WD, in (mm) – No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 104 (2642) std; 106.2
(2697) opt. susp. front
Front Tire Size, 2WD – No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track – 380/85 (14.9) R28 R1W
Rear Tire Size or Track Width – 460/85 (18.4) R38 R1W
Maxxum 150 Axles and Brakes
Final Drive Location and Description – Planetary / Inboard
Rear Axle Output End, Flange or Bar – Flange std; Bar opt.
Rear Axle Bar Diameter, in (mm) – 3.625 (92)
Suspended Front Axle Available – Optional
Service Brake Type – Wet disc
Hydraulic System
Hydraulic System Type – Pressure Flow Compensated
Main Hydraulic Pump Type – Variable Displacement
Implement Pump Flow, gpm (Lpm) – 29.8 (113)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 3 std; 4 opt
Case IH Maxxum 150 Hitch
3-Point Hitch Category – Category 2
Optional Hitch Category – Category 2 / 3N
Draft Sensing or Lift Control – Electronic, lower link pins
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 6,200 (2812) OECD
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 7,700 (3492) OECD
Drawbar Description – Category 3, Swinging
Maxxum 150 Dimensions and Weights
Length, 2WD, incl. Hitch/Drawbar, in (mm) – No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 175.8 (4465)
std.; 178 (4520) Suspended
Height to Top of Cab, in (mm) – 84.6 (2150)
Height to Top of ROPS raised, in (mm) – No open ROPS
Overall Width, with standard wheels or tracks, in (mm) – 98 (2489) Bar
axle ends
Weight, 2WD w/ROPS, lb (kg) – No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) – No open ROPS
Weight, 2WD w/Cab, lb (kg) – No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 12,800
(5806)
Weight, Total allowable, w/maximum ballast, lb (kg) – 19,841 (9000)
Case L765 Loader
Weight without bucket – 1,135 lbs (514 kg)
Height to pin – 167 inches (424 cm)
Clearance, dumped bucket – 129 inches (327 cm)
Dump reach – 31 inches (78 cm)
Dump angle – 56
Reach at ground – 107 inches (271 cm)
Rollback angle – 43
Breakout force at 800mm – 4,060 lbs (1841 kg)
Lift to full height at pin – 5,080 lbs (2304 kg)
Lift to full height at 800mm – 3,370 lbs (1528 kg)
Raise time to height – 3.1s
Bucket dump time – 2.6s
Lowering time – 2.3s
Rollback time – 2.0s