Magnum 7250 Engine Specifications
Engine Model – Case-International 6TA-830
Engine Type – Six-cylinder, turbocharged intercooled diesel
Number of Cylinders – 6, vertical inline
Displacement, cu in (L) – 504,5 (8,3)
Engine Bore, in (mm) – 4,49 (114,0)
Engine Stroke, in (mm) – 5,32 (135,0)
Aspiration – Turbocharged
Rated Engine Power, hp (kW) – 262,3 (194,2)
Rated Engine Speed, rpm – 2200
Idle Speed, rpm – 825-2395
Compression – 16.5:1
Firing Order – 1-5-3-6-2-4
Fuel Injection Pump – Bosch PS6MW
Valve Clearance (Intake), in (mm) – 0,012 (0,305)
Valve Clearance (Exhaust), in (mm) – 0,024 (0,609)
Fuel Tank Capacity, gal (L) – 95,0 (359,0)
Oil Capacity, qts (L) – 22,0 (21,0)
Coolant Capacity, qts (L) – 31,0 (29,3)
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 110
Case Magnum 7250 Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 215,0 (160,3)
PTO Speeds, rpm – 1000
PTO Clutch – Electro-hydraulic wet disc
Case IH Magnum 7250 Transmission
Transmission Type – 18F/4R, Full power shift
Number of Forward Speeds – 18
Number of Reverse Speeds – 4
Clutch – Hydraulic wet disc
Transmission Type – 24F/6R, Powershift with creeper
Number of Forward Speeds – 24
Number of Reverse Speeds – 6
Maximum Speed (Forward), mph (kph) – 20,4 (32,8)
Maximum Speed (Reverse), mph (kph) – 7,4 (11,9)
Maximum Forward Speed (Creeper), mph (kph) – 2,2 (3,5)
Maximum Reverse Speed (Creeper), mph (kph) – 1,8 (2,9)
Service Brake – Differential hydraulic wet disc
Wheels and Tires
Drive Wheels – 4WD 4×4
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 16.9-28
Rear Tire Size – 20.8R-38
Case 7250 Magnum Hydraulics and Hitch
Hydraulic System Type – Closed center pressure flow compensated (PFC)
Implement Pump Flow, gpm (Lpm) – 22,0 (83,3)
Total Flow, gpm (Lpm) – 29,0 (110,0)
Hydraulic Pressure, Bar (psi) – 160 (2300)
Hydraulic Capacity, gal (L) – 45,5 (173,0)
Number of Standard Remote Valves – 3/4
3-Point Hitch Category – 3
Draft Sensing or Lift Control – Electronic lower link draft sensing
Standard Lift Capacity, lb (kg) – 14950 (6785)
Case Magnum 7250 Dimensions and Weight
Wheelbase, in (mm) – 118,3 (3000)
Ground Clearance, in (mm) – 19,5 (490)
Front Tread, in (mm) – 60-95 (1520-2410)
Weight (Shipping), lb (kg) – 17450 (7930)
Weight (Operating), lb (kg) – 18140 (8330)