Case Magnum 7130 Engine Technical Data
Engine Model – Case-International 6T-830
Engine Type – 6-cylinder, 12-valve, turbocharged diesel
Number of Cylinders – Six, vertical inline
Displacement, cu in (L) – 505 (8,3)
Engine Bore, in (mm) – 4,49 (114,0)
Engine Stroke, in (mm) – 5,32 (135,0)
Aspiration – Turbocharged
Rated Engine Power, hp (kW) – 208,0 (153,6)
Rated Engine Speed, rpm – 2200
Idle Speed, rpm – 825-2395
Compression – 17.3:1
Firing Order – 1-5-3-6-2-4
Fuel Injection Pump – Bosch PS6A
Valve Clearance (Intake), in (mm) – 0,012 (0,305)
Valve Clearance (Exhaust), in (mm) – 0,024 (0,609)
Fuel Tank Capacity, gal (L) – 95,0 (359,0)
Oil Capacity, qts (L) – 22,0 (21,0)
Coolant Capacity, qts (L) – 30,0 (28,6)
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 110
Case 7130 Magnum Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 170,0 (126,8)
PTO Speeds, rpm – 1000
PTO / Engine Speeds, rpm – 1000/2200
PTO Clutch – Wet disc
Transmission Configuration
Transmission Type – 18F/2R, Full power shift
Number of Forward Speeds – 18
Number of Reverse Speeds – 2
Clutch – Hydraulic wet disc
Transmission Type – 24F/3R, Powershift with creeper
Number of Forward Speeds – 24
Number of Reverse Speeds – 3
Maximum Speed (Forward), mph (kph) – 19,6 (31,5)
Maximum Speed (Reverse), mph (kph) – 3,0 (4,8)
Maximum Forward Speed (Creeper), mph (kph) – 2,2 (3,5)
Maximum Reverse Speed (Creeper), mph (kph) – 0,8 (1,3)
Service Brake – Differential hydraulic wet disc
Case IH Magnum 7130 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size (2WD) – 14L-16.1
Rear Tire Size (2WD) – 18.4R42
Front Tire Size (4WD) – 14.9R28
Rear Tire Size (4WD) – 18.4R42
Case Magnum 7130 Hydraulics and Hitch
Hydraulic System Type – Closed center (PFC)
Implement Pump Flow, gpm (Lpm) – 22,0 (83,3)
Total Flow, gpm (Lpm) – 29,0 (110,0)
Hydraulic Pressure, Bar (psi) – 180 (2600)
Hydraulic Capacity, gal (L) – 50,5 (191,0)
Number of Standard Remote Valves – 2/4
3-Point Hitch Category – 3/3N
Draft Sensing or Lift Control – Electronic lower link
Standard Lift Capacity 24-in behind pin, lb (kg) – 9300 (4220)
Magnum 7130 Dimensions and Weight
Wheelbase, in (mm) – 118,3 (3000)
Length (2WD), in (mm) – 191,4 (4860)
Length (4WD), in (mm) – 198,8 (5040)
Height (2WD), in (mm) – 119,3 (3030)
Height (4WD), in (mm) – 118,3 (3000)
Ground Clearance (2WD), in (mm) – 22,8 (570)
Ground Clearance (4WD), in (mm) – 17,6 (440)
Front Tread (2WD), in (mm) – 60-86 (1520-2180)
Front Tread (4WD), in (mm) – 60-95 (1520-2410)
Rear Tread, in (mm) – 60-127 (1520-3220)
Weight (2WD), lb (kg) – 16280 (7390)
Weight (4WD), lb (kg) – 17540 (7960)