Magnum 210 Engine Specifications
Engine Make – Case IH FPT
Engine Model – 6.7 L
Number of Cylinders – 6
Displacement, cu in (L) – 411 (6.7)
Engine Bore, in (mm) – 4.095 (104)
Engine Stroke, in (mm) – 5.20 (132)
Advertised Engine Power, Rated, hp (kW) – 215 (158)
Maximum Engine Power, hp (kW) – 260 (191)
Rated Engine Speed, rpm – 2200
Power Boost, hp (kW) – 45 (33)
Fuel Tank capacity, gal (L) – 105 (397)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – 15 (57)
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged and air
to air intercooler
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4A (Interim)
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – SCR
w/ DEF
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Viscous
Electrical System Rating, Volts – 12
Alternator Rating, Amps – Std 150; Opt 200
Case IH Magnum 210 Power Take-Off
PTO Horsepower, Standart / Optional Transmission, hp (kW) – 180 (134)
PTO Speeds, rpm – 540 / 1000
PTO operational Type (Independent; Live; Continuous) – Independent
Transmission
Manufacturer’s Description – 19 Speed Full Powershift
Transmission Type – Full Powershift
Number of Forward / Reverse Speeds – 19F / 6R
Maximum Speed Forward, mph (kph) – 25 (40)
Creeper Range Available – Dealer install
Shuttle (Forward-Reverse) Available – Yes
Manufacturer’s Description – 19 x 6 Full Powershift (19th Economy Gear)
Transmission Type – Full Powershift
Number of Forward / Reverse Speeds – 19F / 6R
Magnum 210 Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 118.3 (3005)
Front Tire Size orTrack Width, MFD/4WD or Track – 380/85 R34, R1
Rear Tire Size or Track Width – 480/80 R46, R1 Duals
Axles and Brakes
Final Drive Location and Description – Planetary / Inboard
Axle Output End, Flange or Bar – Bar
Axle Bar Diameter, in (mm) – 4.0 (102)
Suspended Front Axle Available – Yes / Option
Service Brake Type – Wet disc
Case IH Magnum 210 Hydraulics and Hitch
Hydraulic System Type – Pressure-flow compensating (PFC)
Main Hydraulic Pump Type – Variable Displacement
Implement Pump Flow, gpm (Lpm) – 35.7 (135)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 3 std; 4 or 5 opt.
3-Point Hitch Category – Category 2 / 3N
Draft Sensing or Lift Control – Electronic, lower link
Draft Link Ends Telescopic – Yes; quick coupler opt.
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 12,100 (5488)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 14,100 (6396)
Drawbar Description – Category 3, Swinging
Magnum 210 Dimensions and Weight
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 234 (5944)
Height to Top of Cab, in (mm) – 126.2 (3206)
Height to Top of ROPS raised, in (mm) – No open ROPS
Overall Width, with standard wheels or tracks, in (mm) – 119 (3020) bar
axle ends
Weight, 2WD w/Cab, lb (kg) – No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 21,500
(9750)
Weight, Total allowable, w/maximum ballast, lb (kg) – 25,243 (11450)