Farmall 90C Engine Specifications
Engine Make – Case IH FPT
Engine Model – 3.4 L
Number of Cylinders – 4
Displacement, cu in (L) – 207 (3.4)
Engine Bore, in (mm) – 3.90 (99)
Engine Stroke, in (mm) – 4.331 (110)
Advertised Engine Power, Rated, hp (kW) – 86 (64)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – np
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 30.3 (115)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – 2.8 (10.6)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Wastegate turbocharged
and aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – SCR
with DEF
Exhaust Gas Recirculation (EGR) – Cooled EGR
Cleanup Catalyst (CUC) – CUC standard
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Case IH Farmall 90C Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 73 (54)
PTO Speeds, rpm – 540 std; 540E or 1000 opt.
PTO operational Type (Independent; Live; Continuous) – Independent
Basic Transmission
Manufacturer’s Description – 12×12 Power Shuttle
Transmission Type – 4 synchro gears in 3 non-synchro ranges
Number of Forward / Reverse Speeds – 12F / 12R
Maximum Speed Forward, mph (kph) – 18.6 (30)
Creeper Range Available – Optional 20×20
Shuttle (Forward-Reverse) Available – Standard
Optional Transmission
Manufacturer’s Description – 24×24 Power Shuttle and Hi-Lo
Transmission Type – 4 gears, 3 ranges with Hi-Lo
Number of Forward / Reverse Speeds – 24F / 24R
Manufacturer’s Description – 12×12 Synchro Shuttle
Transmission Type – Mechanical shuttle
Number of Forward / Reverse Speeds – 12F / 12R
Farmall 90C Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
std; 2WD opt. (later in 2015)
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase, 2WD, in (mm) – 92.2 (2343)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 90 (2285)
Front Tire Size, 2WD – 7.50×16 to 11L-15
Front Tire Size orTrack Width, MFD/4WD or Track – 11.2 R24 std; 14.9
R24, R1W w/Hi-Lo
Rear Tire Size or Track Width – 16.9 R30 std; 18.4 R34, R1W w/Hi-Lo
Axles and Brakes
Final Drive Location and Description – Inboard planetary
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet disc
Case IH Farmall 90C Hydraulic System
Hydraulic System Type – Open center
Main Hydraulic Pump Type – Gear
Implement Pump Flow, gpm (Lpm) – 16..9 (64)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 2 std; 3rd dealer install
3-Point Hitch
3-Point Hitch Category – Category 2
Optional Hitch Category – Convertible to Category 1
Draft Sensing or Lift Control – Draft sensing top link
Draft Link Ends Telescopic – Standard
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 4,339 (1968)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 5,620 (2549)
Drawbar Description – Swinging, extendable
Farmall 90C Dimensions and Weight
Length, 2WD, incl. Hitch/Drawbar, in (mm) – 163.1 (4144)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 160.1 (4086)
Height to Top of Cab, in (mm) – 98.2 to 102.1 (2494 to 2594)
Height to Top of ROPS raised, in (mm) – 102.6 to 106.5 (2606 to 2706)
Overall Width, with standard wheels or tracks, in (mm) – 75.7 (1923)
across fenders
Weight, 2WD w/ROPS, lb (kg) – 6,989 (3170)
Weight, MFD/4WD w/ROPS, lb (kg) – 7,672 (3480)
Weight, 2WD w/Cab, lb (kg) – 7,474 (3390)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 8,157 (3700)
Attachments
Case IH L575 Loader
Breakout force (at pin) – 4730 lbs (2145 kg)
Breakout force (bucket) – 3058 lbs (1387 kg)
Lift to full height (at pin) – 1782 lbs (808 kg)
Case IH L735 Loader
Breakout force (at pin) – 4960 lbs (2249 kg)
Lift to full height (at pin) – 4034 lbs (1829 kg)
Raise time to height – 2.4 s