Classification – Utility tractor
Case 75C Engine Specifications
Engine Make – FPT
Engine Model – 3.4 L
Number of Cylinders – 4
Advertised Engine Power, Rated, hp (kW) – 74 (55)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – 2300
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 23.8 (90)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Displacement, cu in (L) – 207 (3.4)
Engine Bore, in (mm) – 3.90 (99)
Engine Stroke, in (mm) – 4.33 (110)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Wastegate turbocharged
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber – Direct
Emission Level, US EPA Tier – Tier 4B / Final
Exhaust Gas Recirculation (EGR) – Cooled EGR
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – Particulate Matter Catalyst
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120
Case 75 C Farmall Transmission
Manufacturer’s Description – 8×8 Mechanical Shuttle
Transmission Type – 4 Synchronized gears, 2 non-synch ranges
Number of Forward / Reverse Speeds – 8F x 8R
Maximum Speed Forward, mph (kph) – 20.1 (32.4)
Creeper Range Available – Yes
Shuttle (Forward-Reverse) Available – Yes
Optional Transmission 1
Manufacturer’s Description – 8×8 Power Shuttle
Transmission Type – 4 Synchronized gears, 2 non-synch ranges
Number of Forward / Reverse Speeds – 8F x 8R
Optional Transmission 2
Manufacturer’s Description – 12×12 Hydraulic Shuttle
Transmission Type – 4 Synchronized gears, 3 non-synch ranges
Number of Forward / Reverse Speeds – 12F x 12R
Case IH Farmall 75C Tractor PTO Performance
Power Take Off Horsepower – 65 (48.5)
PTO Speeds, rpm – 540 std; 540 / 540E opt.
PTO operational Type – Fully independent
Wheels
Drive Wheels – 2WD / 4WD
Steering Configuration – Front Steer
Rear Axle Assembly
Final Drive Location and Description – Inboard Planetary
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Front Axle
Suspended Front Axle Available – No
Brakes
Service Brake Type – Wet Disc
Farmall 75 C Hydraulic System
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Gear
Implement Pump Flow, gpm (Lpm) – 12.5 (47.5)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 1 std; 2 opt
Case IH Farmall 75C Tractor 3-Point Hitch
3-Point Hitch Category – Category 2/1
Optional Hitch Category – No option
Draft Sensing or Lift Control – Top link sensing
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 3,664 (1662)
Standard Lift Capacity at lift pin, lb (kg) – 4,832 (2192)
Drawbar
Drawbar Description – Swinging
Wheelbase
Wheelbase, 2WD, in (mm) – 85.8 (2180)
Wheelbase, MFD/4WD or Track, in (mm) – 83.9 (2132)
Length
Length, 2WD, incl. Hitch/Drawbar, in (mm) – 149 (3785)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 149 (3785)
Vertical Dimensions
Height to Top of Cab, in (mm) – 98 (2489)
Height to Top of ROPS raised, in (mm) – 101 (2565)
Farmall 75C Tractor Width w/Tires
Overall Width, with standard wheels or tracks, in (mm) – 83 (2108)
across fenders
Weight (w/Tires)
Weight, 2WD w/ROPS, lb (kg) – 5,026 (2280)
Weight, MFD/4WD w/ROPS, lb (kg) – 5,952 (2700)
Weight, 2WD w/Cab, lb (kg) – 5,622 (2550)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 6,239 (2830)
Weight, Total allowable, w/maximum ballast, lb (kg) – 7,338 (3328)
Tire Size
Front Tire Size, 2WD – 7.50 x 16, 6 ply, F2
Front Tire Size orTrack Width, MFD/4WD or Track – 11.2 R24, R1W
Rear Tire Size or Track Width – 16.9 R30, R1W