Farmall 70A Engine Specifications
Advertised Engine Power, Rated, hp (kW) – 70 (52)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – 2600
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 17.1 (65)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Engine Make – Case IH FPT
Engine Model – 2.2 L
Number of Cylinders – 3
Displacement, cu in (L) – 135.9 (2.23)
Engine Bore, in (mm) – 3.70 (94)
Engine Stroke, in (mm) – 4.21 (107)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Wastegate turbocharged
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – Internal EGR
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – Particulate Matter Catalyst
Exhaust Pipe, Vertical stack or Horizontal – Downswept std; Vertical opt
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 62 (46)
PTO Speeds, rpm – 540 std; 540/540E opt.
PTO operational Type (Independent; Live; Continuous) – Independent
Case IH Farmall 70A Transmission
Manufacturer’s Description – 8Fx8R Mechanical Shuttle
Transmission Type – Synchro-shuttle
Number of Forward / Reverse Speeds – 8F / 8R
Maximum Speed Forward, mph (kph) – np
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – Standard
Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 2WD
/ 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase, 2WD, in (mm) – 96.4 (2450)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 97.6 (2478)
Front Tire Size, 2WD – 7.50×16, 6PR
Front Tire Size orTrack Width, MFD/4WD or Track – 9.5×24, 6PR
Rear Tire Size or Track Width – 14.9×28, 8PR
Farmall 70A Axles and Brakes
Final Drive Location and Description – Planetary
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet disc
Hydraulic System
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Dual gear
Implement Pump Flow, gpm (Lpm) – 11.9 (45)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 1 std.; 2nd opt.
Case IH Farmall 70A Hitch
3-Point Hitch Category – Category 2 / 1
Optional Hitch Category – No option
Draft Sensing or Lift Control – Draft and Position Control
Draft Link Ends Telescopic – Standard
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 2,701 (1225) OECD
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Optional Lift Capacity at lift pin, lb (kg) – No option
Farmall 70A Dimensions and Weight
Length, 2WD, incl. Hitch/Drawbar, in (mm) – 129.5 (3290)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 134 (3404)
Height to Top of Cab, in (mm) – No cab
Height to Top of ROPS raised, in (mm) – 97.4 (2473)
Overall Width, with standard wheels or tracks, in (mm) – 67.5 (1714)
Weight, 2WD w/ROPS, lb (kg) – 3,770 (1710) preliminary
Weight, MFD/4WD w/ROPS, lb (kg) – 4,079 (1850) preliminary
Weight, Total allowable, w/maximum ballast, lb (kg) – 4,871 (2210)
preliminary