Farmall 65C Engine Specifications
Engine Make – FPT
Engine Model – 3.4 L
Number of Cylinders – 4
Displacement, cu in (L) – 207 (3.4)
Engine Bore, in (mm) – 3.90 (99)
Engine Stroke, in (mm) – 4.33 (110)
Advertised Engine Power, Rated, hp (kW) – 64 (47.7)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – 2300
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 23.8 (90)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Wastegate turbocharged
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – Cooled EGR
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – Particulate Matter Catalyst
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120
Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 50 (37)
PTO Speeds, rpm – 540 std; 540 / 540E opt.
PTO operational Type (Independent; Live; Continuous) – Fully independent
Case IH Farmall 65C Transmission Configuration
Manufacturer’s Description – 12×12 Power Shuttle
Transmission Type – 4 Synchronized gears, 3 non-synch ranges
Number of Forward / Reverse Speeds – 12F x 12R
Maximum Speed Forward, mph (kph) – 19 (30.6)
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – Standard
Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase, 2WD, in (mm) – No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 83.9 (2132)
Front Tire Size orTrack Width, MFD/4WD or Track – 11.2 R24, R1W
Rear Tire Size or Track Width – 16.9 R30, R1W
Farmall 65C Axles and Brakes
Final Drive Location and Description – Inboard Planetary
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet Disc
Hydraulic System
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Tandem Gear
Implement Pump Flow, gpm (Lpm) – 12.5 (47.5)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 2 std; 3rd dealer install
Case IH Farmall 65C Hitch
3-Point Hitch Category – Category 2
Optional Hitch Category – No option
Draft Sensing or Lift Control – Top link draft sensing
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 3,664 (1662)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Standard Lift Capacity at lift pin, lb (kg) – 4,832 (2192)
Optional Lift Capacity at lift pin, lb (kg) – No option
Drawbar Description – Swinging
Farmall 65C Dimensions and Weight
Length, 2WD, incl. Hitch/Drawbar, in (mm) – No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 151 (3836)
Height to Top of Cab, in (mm) – 97.8 (2484)
Overall Width, with standard wheels or tracks, in (mm) – 75.7 (1922)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 6,239 (2830)
Weight, Total allowable, w/maximum ballast, lb (kg) – 7,338 (3328)
Case IH L720 Loader
Height (to pin) – 122 inches (309 cm)
Clearance, dumped bucket – 85 inches (215 cm)
Dump reach – 30 inches (76 cm)
Dump angle – 65
Rollback angle – 45
Breakout force (lift) – 2,650 lbs (1202 kg)
Lift to full height (at pin) – 2,100 lbs (952 kg)