Classification – Compact Utility tractor
Case IH Farmall 50 C Engine Specifications
Engine Model – IHI Shibaura N844L-F-34
Number of Cylinders – 4
Advertised Engine Power, Rated, hp (kW) – 46 (34)
Maximum Engine Power, hp (kW) – 46 (34)
Rated Engine Speed, rpm – 2600
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 10.5 (40)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Displacement, cu in (L) – 135 (2.216)
Engine Bore, in (mm) – 3.307 (84)
Engine Stroke, in (mm) – 3.937 (100)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Natural
Fuel System Description – In-Line Pump System
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Indirect
Emission Level, US EPA Tier – Tier 4B / Final
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – DPF standard
Exhaust Pipe, Vertical stack or Horizontal – Horizontal
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 85
Power Take Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 37.3 / 35.4
(27.8 / 26.4)
PTO Speeds, rpm – 540
PTO operational Type – Independent
Case IH Farmall 50C Transmission Configuration
Manufacturer’s Description – 16×16 Synchro-shuttle
Transmission Type – 4 gears synchro, 4 ranges non-synchro
Number of Forward / Reverse Speeds – 16F / 16R
Maximum Speed Forward, mph (kph) – 17 (27.3)
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – Standard
Case International 50 Optional Transmission
Manufacturer’s Description – 3-Range Hydrostatic
Transmission Type – Hydrostatic w/Cruise Control
Number of Forward / Reverse Speeds – Infinite, 3 ranges
Wheel Configuration
Drive Wheels – 4WD
Steering Configuration: Front Steer
Case IH Farmall 50 C Tractor Rear Axle
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Front Axle and Brakes
Suspended Front Axle Available – No
Service Brake Type – Wet disc
Case IH Farmall 50C Hydraulic System
Hydraulic System Type – Open center
Main Hydraulic Pump Type – Dual gear
Implement Pump Flow, gpm (Lpm) – 8.2 (31)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 1 or 2 optional
Case International 50 Tractor 3-Point Hitch Features
3-Point Hitch Category – Category 1
Optional Hitch Category – No option
Draft Sensing or Lift Control – Position control
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 2,116 (960)
Standard Lift Capacity at lift pin, lb (kg) – 2,756 (1250)
Drawbar
Drawbar Description – Extendable
Wheelbase
Wheelbase, MFD/4WD, in (mm) – 73 (1854)
CaseIH Farmall 50 C Dimensions
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 129 (3277)
Height to Top of ROPS raised, in (mm) – 96.5 (2451)
Overall Width, with standard wheels or tracks, in (mm) – 69 (1753)
Weight
Weight, MFD/4WD w/ROPS, lb (kg) – 3,945 (1789)
Tires
Front Tire Size orTrack Width, MFD/4WD or Track – 12×16.5, 6PR R4
Rear Tire Size or Track Width – 17.5Lx24, 6PR R4