Classification – Compact Utility tractor
Case IH Farmall 45 A Engine Specifications
Engine Model – Shibaura N844L
Engine Type – 4-Cylinder Diesel
Engine Power, Rated, hp (kW) – 45 (33.5)
Engine Speed, rpm – 2700
Gross Engine/PTO HP – 45/39
Power Boost, hp (kW) – No boost
Fuel Tank, gal (L) – 13.5 (51)
Number of Cylinders /Aspiration – 4/Natural
Displacement, cu in (L) – 135.2 (2.2)
Engine Bore, in (mm) – 3.31 (84)
Engine Stroke, in (mm) – 3.94 (100)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Natural
Air Filter – Duel elements, dry type with cleanable outer element and
replaceable inner safety element
Fuel System
Fuel System Type – In-Line Pump System
Fuel Type – Standard diesel fuels or B5 Biodiesel (meeting ASTM6751
standards)
Fuel System Control – Mechanical
Fuel Injection to combustion chamber – Indirect
Emission and Exhaust Treatment
Emission Level – Tier 3
Exhaust Pipe – Vertical
Cooling System
Fan Drive Type – Belt
Electrical System
System Rating, Volts – 12
Alternator Rating, Amps – 40
Battery Capacity (Cold Cranking Amps) – 800
Lighting – 2hi/lo beam halogen headlights, flashing safety lights/turn
signals
Accessory Power Outlets – Standard equipment, 7-pin implement outlet
Case IH Farmall 45A Tractor Transmission
Description – 8×8 Synchro Shuttle
Transmission Type – Gear
Traction Clutch – Dry, 11-inch (279.4mm) diameter organic plate
Forward / Reverse Speeds – 8F x 8R
Maximum Speed Forward, mph (kph) – 19.2 (30.9)
Creeper Range – No
Shuttle (Forward-Reverse) – Yes
Case IH Farmall 45 A PTO
PTO Horsepower, hp (kW) – 39 (29)
Power Take Off Speeds, rpm – 540
PTO Type – Independent
Wheels
Drive Wheels – 2WD / 4WD
Steering – Front Steering
Case International 45 Rear Axle
Final Drive – Inboard/ Planetary
Axle Output End – Flange
Rear Differential Lock – Mechanical foot pedal engagement
Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Front axle
Front Differential Lock – Limited Slip
FWD Clutch Engagement – Mechanical Lever
Brakes
Brake Type – Wet Disc
Case IH Farmall 45A Hydraulic System
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Fixed Displacement Gear Pump
Standard Pump Flow, gpm (Lpm) – 11.6 (44)
Implement Pump Capacity – 11.6 gpm (44 L/min.)
Steering System – Hydrostatic power steering w/dedicated gear pump 5.3
gpm (20.1 L/min.)
Total Maximum Tractor Flow – 16.9 gpm (64.1 L/min.)
Number of Standard Remote Valves – 1
Case International 35 Tractor 3-Point Hitch Features
3-Point Hitch – Category 2 / 1
Optional Hitch – Category 1
Draft Sensing or Lift Control – Position Control only
Draft Link Ends Adjustable – Yes
Rear PTO – Standard 540-RPM, w/flip-up PTO shaft guard
3-Point Hitch Lift Capacity
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 1,830 (830)
Drawbar
Drawbar Description – Swinging
Case IH Farmall 45 A Tractor Wheelbase
2WD, in (mm) – 77.75 (1975)
4WD, in (mm) – 77.16 (1960)
Tire Size
Front Tire Size, 2WD – 6.00×16, 6PR F2
Front Tire Size Width, 4WD – 8.3×24 6PR R1
Rear Tire Size Width – 13.6×28, 6PR R1
General Specifications
Approx. Shipping Weight, 2WD/4WD – 3527 lbs. (1600 kg.)/ 3836 lbs. (1740
kg.)
Approx. Shipping Length, 2WD/4WD – 131.1 in. (3331 mm.)/133.5 in. (3390
mm.)
Approx. Shipping Width, 2WD/4WD 66.1 in. (1680 mm.)/66.1 in. (1680 mm.)
Approx. Shipping Heigth, 2WD/4WD 93.9 in. (2385 mm.)/93.9 in. (2385 mm.)