Classification – Compact Utility tractor
Case IH Farmall 35A Engine Specifications
Engine Make – IHI Shibaura
Engine Model – N843T-F
Number of Cylinders – 3
Displacement, cu in (L) – 91.3 (1.496)
Engine Bore, in (mm) – 3.307 (84)
Engine Stroke, in (mm) – 3.543 (90)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged
Advertised Engine Power, Rated, hp (kW) – 36.2 (27)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – 2600
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 7.4 (28)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Fuel System Description – In-Line Pump System
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber – Indirect
Emission Level, US EPA Tier – Tier 4B / Final
Exhaust Gas Recirculation (EGR) – Internal EGR
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – DPF standard
Exhaust Pipe, Vertical stack or Horizontal – Horizontal
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 85
Case International 35 PTO Performance
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 30.7 (22.9)
Gear / 29.0 (21.6) HST
Power Take Off Speeds, rpm – 540
PTO operational Type – Independent
Case IH Farmall 35 A Basic Transmission
Manufacturer’s Description – 12×12 Gear w/ Synchronized Shuttle
Transmission Type – Synchronized shuttle; gears/ranges non-synch
Number of Forward / Reverse Speeds – 12F / 12R
Maximum Speed Forward, mph (kph) – 14.2 (22.9)
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – Standard
Optional Transmission
Manufacturer’s Description – 3-Range Hydrostatic
Transmission Type – Hydrostatic; Cruise standard
Number of Forward / Reverse Speeds – Infinite, 3 ranges
Case International 35 Tractor Wheel Configuration
Drive Wheels – 4WD
Steering Configuration: Front Steer
Rear Axle Assembly
Final Drive Location and Description – Inboard planetary
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Front Axle
Suspended Front Axle Available – No
Brakes
Service Brake Type – Wet disc
Case IH Farmall 35A Hydraulic System
Hydraulic System Type – Open center
Main Hydraulic Pump Type – Gear
Implement Pump Flow, gpm (Lpm) – 8.2 (31)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 1 or 2 optional
3-Point Hitch Features
3-Point Hitch Category – Category 1
Optional Hitch Category – No option
Draft Sensing or Lift Control – Position control
Draft Link Ends Telescopic – No
Case IH Farmall 35A Tractor 3-Point Hitch Lift Capacity
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 1,433 (650)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Standard Lift Capacity at lift pin, lb (kg) – 1,808 (820)
Optional Lift Capacity at lift pin, lb (kg) – No option
Drawbar
Drawbar Description – Extendable
Wheelbase
Wheelbase, MFD/4WD, in (mm) – 67.5 (1715)
Case IH Farmall 35 A Dimensions
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 121 (3074)
Height to Top of ROPS raised, in (mm) – 87.7 (2227)
Overall Width, with standard wheels or tracks, in (mm) – 66.5 (1689)
Weight (w/Tires)
Weight, MFD/4WD w/ROPS, lb (kg) – 3,067 (1391)
Weight, Total allowable, w/maximum ballast, lb (kg) – 3,867 (1754)
Tire Size
Front Tire Size, MFD/4WD – 25×8.50-14, 6PR R4
Rear Tire Size – 43×16.00-20, 4PR R4