Classification – Utility tractor
Case IH Farmall 120U Engine Specifications
Engine Model – Case IH FPT 3.4 L
Number of Cylinders – 4
Advertised Engine Power, Rated, hp (kW) – 117 (86)
Maximum Engine Power, hp (kW) – 117 (86)
Rated Engine Speed, rpm – 2300
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 43.5 (165)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – 3.2 (12)
Displacement, cu in (L) – 207 (3.4)
Engine Bore, in (mm) – 3.90 (99)
Engine Stroke, in (mm) – 4.33 (110)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Wastegate
Turbocharger, air-to-air aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect Direct
Emission Level, US EPA Tier – Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – SCR
with DEF
Exhaust Gas Recirculation (EGR) – Cooled EGR
Cleanup Catalyst (CUC) – CUC standard
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120
CaseIH Farmall 120U Tier 4B Tractor PTO
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 99 (74)
Power Take-Off Speeds, rpm – 540 / 1000 std; 540E opt.
PTO operational Type – Independent
Farmall 120U Basic Transmission Configuration
Manufacturer’s Description – 16×16 Semi-Powershift
Transmission Type – 4 powershift speeds in 4 ranges (2 synchronized)
Number of Forward / Reverse Speeds – 16F / 16R
Maximum Speed Forward, mph (kph) – 25 (40)
Creeper Range Available – Yes, see optional
Shuttle (Forward-Reverse) Available – Standard
Optional Transmission 1
Manufacturer’s Description – 32×32 Creeper
Transmission Type – Electrohydraulic engagement
Number of Forward / Reverse Speeds – 32F/ 32R
Optional Transmission 2
Manufacturer’s Description – 16×16 Autoshift
Transmission Type – Autoshift road and field modes
Number of Forward / Reverse Speeds – 16F / 16R
Farmall 120 U Wheels Configuration
Drive Wheels – 4WD
Steering Configuration – Front Steering
Rear Axle Assembly
Final Drive Location and Description – Inboard planetary
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Front Axle
Suspended Front Axle Available – Optional
Brakes
Service Brake Type – Wet disc
Case IH Farmall 120U TractorHydraulic System
Hydraulic System Type – Open Center system w/ closed center remotes
Main Hydraulic Pump Type – Dual gear
Implement Pump Flow, gpm (Lpm) – 21.1 (80)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 3 standard
3-Point Hitch Features
3-Point Hitch Category – Category 2
Optional Hitch Category – No option
Draft Sensing or Lift Control – Electronic Draft Control
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 8,084 (3660)
Drawbar
Drawbar Description – Swinging, Category 2
Wheelbase
Wheelbase, MFD/4WD, in (mm) – 93.7 (2380)
Length
Length, MFD/4WD, incl. Hitch/Drawbar, in (mm) – 165 (4191)
Farmall 120 U Vertical Dimensions
Height to Top of Cab, in (mm) – 108 (2745)
Width w/Tires
Overall Width, with standard wheels, in (mm) – 88.5 (2248) across
fenders w/ extensions
Weight (w/Tires)
Weight, MFD/4WD w/Cab, without ballast, lb (kg) – 10,031 (4550)
Weight, Total allowable, w/maximum ballast, lb (kg) – 13,668 (6200) in
field; 17,636 (8000) on road
Tire Size
Front Tire Size Width, MFD/4WD – 13.6 R28
Rear Tire Size Width – 16.9 R38