Classification – Utility tractor
Engine Performance
Advertised Engine Power, Rated, hp (kW) – 115 (86)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – 2300
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 37 (140)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Case IH Farmall 115U PTO Performance
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 98 (73)
PTO Speeds, rpm – 540 / 1000 std; 540E opt.
PTO operational Type (Independent; Live; Continuous) – Independent
Case 115U Basic Engine Specifications
Engine Make – Case IH FPT
Engine Model – 3.4 L
Number of Cylinders – 4
Displacement, cu in (L) – 207 (3.4)
Engine Bore, in (mm) – 3.90 (99)
Engine Stroke, in (mm) – 4.33 (110)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged,
air-to-air aftercooled
Fuel System
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect Direct
Emission and Exhaust Treatment
Emission Level, US EPA Tier – Tier 4A (Interim)
Exhaust Gas Recirculation (EGR) – Cooled EGR
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – DPF standard
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System
Fan Drive Type – Belt
Electrical System
System Rating, Volts – 12
Alternator Rating, Amps – 120
CaseIH Farmall 115U Tractor Basic Transmission
Manufacturer’s Description – 12×12 Power Shuttle
Transmission Type – 4 Synchronized gears, 3 non-synch ranges
Number of Forward / Reverse Speeds – 12F / 12R
Maximum Speed Forward, mph (kph) – 25 (40)
Creeper Range Available – Yes, see optional
Shuttle (Forward-Reverse) Available – Standard
Optional Transmission 1
Manufacturer’s Description – 20×20 Power Shuttle with Creeper
Transmission Type – 5 Synch gears, 4 non-synch ranges
Number of Forward / Reverse Speeds – 20F/ 20R
Optional Transmission 2
Manufacturer’s Description – 24×24 Power Shuttle with Hi-Lo
Transmission Type – 6 Synchronized gears, 4 non-synch ranges
Number of Forward / Reverse Speeds – 24F / 24R
Farmall 115 U Wheels Configuration
Drive Wheels or Tracks; 2WD, 4WD – 4WD
Steering Configuration: Front Steer, Frame Articulated – Front Steer
Rear Axle Assembly
Final Drive Location and Description – Inboard planetary
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Front Axle
Suspended Front Axle Available – No
Brakes
Service Brake Type – Wet disc
CaseIH Farmall 115U Tractor Hydraulic System
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Dual gear
Implement Pump Flow, gpm (Lpm) – 16.1 (61)
Optional Pump Flow, gpm (Lpm) – 21.1 (80)
Number of Standard Remote Valves – 2 std; up to 3 opt
Farmall 115 U 3-Point Hitch Features
3-Point Hitch Category – Category 2
Draft Sensing or Lift Control – Electronic Draft Control
Draft Link Ends Telescopic – Yes
3-Point Hitch Lift Capacity
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 6,393 (2900)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 11,949 (5420)
Drawbar
Drawbar Description – Swinging, Category 2
Wheelbase
Wheelbase, MFD/4WD, in (mm) – 92.5 (2350)
Length
Length, MFD/4WD, incl. Hitch/Drawbar, in (mm) – 164 (4161)
Vertical Dimensions
Height to Top of Cab, in (mm) – 103 (2612)
Height to Top of ROPS raised, in (mm) – No open ROPS
Width w/Tires
Overall Width, with standard wheels, in (mm) – 83 (2108) across fenders
Weight (w/Tires)
Weight, MFD/4WD w/ROPS, lb (kg) – No open ROPS
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 9,370 (4250)
Weight, Total allowable, w/maximum ballast, lb (kg) – 11,133 (5050)
Tire Size
Front Tire Size orTrack Width, MFD/4WD or Track – 14.9 R24 R1W
Rear Tire Size or Track Width – 18.4 R34 R1W