Farmall 105N Engine Specifications
Advertised Engine Power, Rated, hp (kW) – 106 (79)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – 2300
Power Boost, hp (kW) – No Boost
Fuel Tank capacity, gal (L) – 20 (77)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Engine Make – Case IH FPT
Engine Model – 4.5 L
Number of Cylinders – 4
Displacement, cu in (L) – 274 (4.5)
Engine Bore, in (mm) – 4.095 (104)
Engine Stroke, in (mm) – 5.20 (132)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged,
intercooled
Fuel System Description – Rotary-Distributor Type
Fuel System Control, Electronic or Mechanical – Mechanical
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 3
Exhaust Pipe, Vertical stack or Horizontal – Horizontal
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120
Case IH Farmall 105N Power Take-Off
PTO Horsepower, Standart / Optional Transmission, hp (kW) – 92 (68.6)
PTO Speeds, rpm – 540 std; 540 / 1000 opt.
PTO operational Type (Independent; Live; Continuous) – Independent
Transmission
Manufacturer’s Description – 16 x 16 w/Mechanical Shuttle
Transmission Type – 4 Synchronized Speeds in 4 Ranges
Number of Forward / Reverse Speeds – 16F / 16R
Maximum Speed Forward, mph (kph) – 18.3 (29.5)
Creeper Range Available – See option w/Creeper
Shuttle (Forward-Reverse) Available – Standard
Manufacturer’s Description – 32×16 Power Shuttle
Transmission Type – Power Shuttle with Hi/Lo
Number of Forward / Reverse Speeds – 32F / 16R
Manufacturer’s Description – Optional Creeper; 44×16
Transmission Type – Shuttle + Creeper
Number of Forward / Reverse Speeds – 44F / 16R
Farmall 105N Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 85.6 (2175)
Front Tire Size orTrack Width, MFD/4WD or Track – 7.50 R18, R1
Rear Tire Size or Track Width – 14.9 R28; 380/85 R28, R1
Axles and Brakes
Final Drive Location and Description – Inboard planetary
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet disc
Case IH Farmall 105N Hydraulics and Hitch
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Dual Gear
Implement Pump Flow, gpm (Lpm) – 16.9 (64)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 2 std, 3rd opt.
3-Point Hitch Category – Category 1 / 2
Optional Hitch Category – No option
Draft Sensing or Lift Control – Draft Control optional
Draft Link Ends Telescopic – Fixed
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 4,400 (1998)
Drawbar Description – Swinging
Farmall 105N Dimensions and Weight
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 158 (4015)
Height to Top of Cab, in (mm) – 90.7 (2303)
Height to Top of ROPS raised, in (mm) – 91.6 (2326)
Overall Width, with standard wheels or tracks, in (mm) – 53.4 (1356) MFD
minimum
Weight, MFD/4WD w/ROPS, lb (kg) – 5,820 (2640)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 6,107 (2770)