Case CX50 Engine Specifications
Engine Model – Perkins 903.27
Engine Type – 4 stroke, direct injection diesel
Number of Cylinders – 3, vertical in-line
Displacement, cu in (L) – 165 (2,7)
Engine Bore, in (mm) – 3,74 (95,0)
Engine Stroke, in (mm) – 5,00 (127,0)
Aspiration – Natural
Maximum Engine Power, hp (kW) – 53,0 (39,5)
Rated Engine Power, hp (kW) – 48,0 (35,8)
Rated Engine Speed, rpm – 2250
Maximum Torque, Nm (ft-lbs) – 189,8 (140,0)
Torque Speed, rpm – 1200
Compression – 17.25:1
Fuel System – Direct injection
Fuel Tank Capacity, gal (L) – 42,3 (159,0)
Oil Capacity, qts (L) – 8,0 (7,6)
Coolant Capacity, qts (L) – 12,6 (11,9)
Electrical System Rating, Volts – 12
Charging System – Alternator
Alternator Rating, Amps – 65
Case CX-50 Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 40,0 (29,8)
PTO Speeds, rpm – 540/1000
PTO Clutch – Hydraulic wet disc
Transmission Configuration
Transmission Type (Std) – 8F/8R, Synchro shuttle
Number of Forward Speeds – 8
Number of Reverse Speeds – 8
Clutch – Dry disc
Clutch Disc Diameter, in (mm) – 12 (300)
Transmission Type (Opt) – 16F/8R, Partial power shift
Number of Forward Speeds – 16
Number of Reverse Speeds – 8
Maximum Forward Speed, mph (kph) – 19,8 (31,8)
Maximum Reverse Speed, mph (kph) – 18,1 (29,2)
Transmission Oil Capacity (2WD/4WD), qts (L) – 36,4 (34,3) / 39,1 (37,0)
Service Brake – Differential hydraulic wet disc
Case IH CX50 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size (2WD) – 7.50-16
Rear Tire Size (2WD) – 14.9-28
Front Tire Size (4WD) – 12.4R24
Rear Tire Size (4WD) – 18.4R30
Case IH CX-50 Hydraulic System
Hydraulic System Type – Open center
Implement Pump Flow, gpm (Lpm) – 13,7 (51,9)
Steering Pump Flow, gpm (Lpm) – 8,5 (32,2)
Total Flow, gpm (Lpm) – 22,2 (84,0)
Hydraulic Pressure, Bar (psi) – 173 (2500)
Hydraulic Capacity (2WD), qts (L) – 9,1 (34,4)
Hydraulic Capacity (4WD), qts (L) – 9,8 (37,1)
Number of Standard Remote Valves – 0/3
3-Point Hitch
3-Point Hitch Category – 2/1
Draft Sensing or Lift Control – Electronic upper link
Standard Lift Capacity at lift pin, lb (kg) – 3665 (1660)
Optional Lift Capacity at lift pin, lb (kg) – 5100 (2310)
Case CX-50 Dimensions and Weight
Wheelbase (2WD), in (mm) – 84,8 (2150)
Wheelbase (4WD), in (mm) – 87,2 (2210)
Length, in (mm) – 141 (3590)
Height, in (mm) – 107 (2720)
Turning Radius, in (mm) – 167 (4240)
Weight (2WD), lb (kg) – 7290 (3300)
Weight (4WD), lb (kg) – 7970 (3620)